Welkom op de website van Batavi Tactical Solutions
Nederlands
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
Fully modular plate carrier
Made from ultra-light multiaxial laminate MX
Features standard laser-cut MOLLE slots on the entire front and back
Includes 3 back-to-back loops for cable management on the front
Incorporates cut-open bartack seams for cable routing
Features a rear zipper for attaching zip-panels (CP-compatible)
Provides hook and loop areas on front, back, and insides for pads or additional pouches
Shoulder straps in size M with extra-slim 25mm patented hook buckle
MOLLE slots on shoulder straps for cable management and additional pouches, with length adjustments via hook and loop fastener
Includes loops on shoulder straps and waistbelt compatible with Lindnerhof Taktik backpacks (e.g., HL334 Modular Backpack)
Includes skeletonised waistbelt with 3 rows featuring 10 MOLLE slots each
Waistbelt with patented hook buckle
Size adjustment through shock cord
Compatible with plate size SAPI L (and SAPI M or NATO-standard by using the plate-holding strap)
Allows for attachment of a chest rig (e.g., MX266 + RMPL144)
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The MX301 Medic Pouch is a horizontally mounted pouch for first aid supplies with quick access from all sides. Its removable interior provides compartments for improved organisation and can be unfolded while the sleeve remains attached to your carrying system.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
Made from 3D mesh, these shoulder pads offer extra comfort.
The cushions are delivered as a pair.
Experience reliable and safe storage of a hand grenade with the Grenade Pouch MX007. Its durable material, secure features, and design focusing on ease of use ensure optimal performance and reliability.
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
Full featured no melt/no drip technical pant suitable for conducting direct action tasks.
The True North Concepts Modular Holster Adaptor (MHA) is designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adaptors by clamping the belt between an aluminum adapter and aluminum belt bars.
The Ten-Speed Ultralight Dump Pouch redefines dump pouches. Extremely compact, only taking up a 2 x 2 MOLLE field; the bag portion stays folded under Ten-Speed® elastic when not in use.
Lightweight, breathable and fast-drying Hood
Proudly designed in collaboration with a JTF2 Sniper.
Using laser cut thermoplastic we have achieved a semi rigid cummerbund that increases stability and weight distribution for the operator.
The Heavy Load Carrying System "The beast" efficiently and stably transports a wide range of heavy and unwieldy loads with customisable options tailored to your physique and equipment.
Here’s something epic you don’t see every year. A unique modular electronic warfare backpack designed to carry the Thor III IED jammer. If you don’t need to watch out for roadside bombs, you can use this very versatile and super customizable pack for hauling all sorts of heavy crap. Made in the USA.
The LT241 Tourniquet Adapter ensures your tourniquet (e.g., CAT Gen. 7) is securely carried and immediately accessible, enhancing your readiness for any critical situation.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
The flame retardant Assault Balaclava FR has been specifically designed to meet the requirements of direct action tasks. These are short, high-intensity missions with zero margin for error.
The LiteFighter® 2 is a lightweight, two-person, three-season tent that provides excellent protection against bugs, inclement weather, and pests during your outdoor adventures. The Litefighter® 2 combat tent uses the same design, materials, and technology found in the popular Litefighter 1 shelter system, but is built to accommodate two full sized occupants.
The Hydration Pouch 2l PA057-2/II is the latest generation of Lindnerhof’s reliable pouch for water bladders. Specifically designed for the safe transport of 2 litre bladders (e.g. Source WXP 2L), it is versatile and built to last.
The Navboard® FlipLite™ is the natural evolution of S&S Precision’s original FlipLite™ offering enhanced durability and performance. Molded with impact modified Nylon, the NavBoard® FlipLIte™ is a case agnostic mobile device mounting platform enabling users to utilize their preferred case. The mobile device is secured to the device panel via silicone retention straps featuring internal ribbing to prevent the straps from peeling off the user's mobile device.
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
Tilak operator pants multicam
Ultralight minimalistic plate carrier for soft and hard hard armor!
English
