English
Beschikbaarheid: 2 Op voorraad
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
Welkom op de website van Batavi Tactical Solutions
Nederlands
FirstSpear STT Plate carrier multicam
- Write a review
€ 299,00
Inclusief belasting
Geleverd binnen 3 - 4 werkdagen
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
FirstSpear STT Plate Carrier + cummerbund!
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
The plate pockets are sized to handle most shooters cut 10" x 12" commercial armor plates, as well as Medium ESAPI/Ceradyne plates (L or XL ESAPI will NOT fit). The bottom flap pushes the plate to the top of the pocket to keep your armor in its proper place over your upper thoracic region. Exclusive to this STT Plate Carrier is the integration of loop velcro strips on the front and back carriers for option of adding PIG AFC Pontoons for increased air flow and padded goodness.
We are offering 3 different cummerbund sizes to maximize fit. Measure your chest around the widest part (usually at nipple height) and it should correspond with your jacket size if you know it. Compare that measurement with the sizes below to select your cummerbund.
S/M: 38"-44" (can hold 6" x 9" soft armor )
M/L: 42"-48" (can hold 6" x 9" soft armor)
L/XL: 48"-52" (can hold soft armor up to 6" x 12" wide)
If you are in between 2 sizes we recommend trying the smaller of the two sizes first. These sizing suggestions are general guidelines. There are multiple variables in play that make fitting armor an imperfect process at best but this will put most people into the size they need to be.
The M/L and L/XL cummerbunds have elastic for up to 2" of additional stretch. The thickness of your plates and whether you are running any soft armor will also affect the sizing and fit. Adding PIG AFC Pontoons will reduce the size and fit considerably.
FS STT
1 Items
Je bent misschien ook geïnteresseerd in
Beschikbaarheid: Niet op voorraad
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
Beschikbaarheid: Niet op voorraad
Based on the low profile front flap of the JPC and CPC. This detachable flap attaches to the front platebag of the JPC or AVS (Standard or MBAV) to provide three M4 mag pouches. Includes three shock-cord magazine retention straps.
Beschikbaarheid: 3 Op voorraad
Attaches to front platebag of JPC or AVS (Standard or MBAV) to provide three M4 mag pouches.
Beschikbaarheid: 2 Op voorraad
Made from 3D mesh, these shoulder pads offer extra comfort.
The cushions are delivered as a pair.
Beschikbaarheid: 2 Op voorraad
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
Beschikbaarheid: Niet op voorraad
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
Beschikbaarheid: Niet op voorraad
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
16 andere producten in dezelfde categorie:
Beschikbaarheid: 2 Op voorraad
The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.
Beschikbaarheid: 2 Op voorraad
The Stackable Ten-Speed M4 Mag Pouch builds on the Ten-Speed Pouches used by the best-of-the-best worldwide and now adds a single row of MOLLE on the front to stack additional pouches.
Beschikbaarheid: 5 Op voorraad
The HL506 tourniquet holder from Lindnerhof enables the stable and quickly accessible attachment of a tourniquet to a Molle platform.
Beschikbaarheid: 3 Op voorraad
The MX762-1 securely holds a 9mm double-stack pistol magazine. Its minimalist design makes the MX762-1 exceptionally lightweight and provides additional flexibility in choosing the closure system best-suited to mission requirements.
Beschikbaarheid: 10 Op voorraad
The Wilcox Filter Cover is an amber lens that quickly attached and detaches to a variety of Night Vision Goggles and Scopes. The unique padded rubber eye cup protects the eye socket from impact injury and the amber filter provides a tactical advantage by greatly reducing green eye splash common to all NVG devices.
Beschikbaarheid: 2 Op voorraad
The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.
Beschikbaarheid: Niet op voorraad
2-layer goretex paclite jacket, easy packable in your platecarrier for quick acces if needed!
Beschikbaarheid: 3 Op voorraad
Attaches to front platebag of JPC or AVS (Standard or MBAV) to provide three M4 mag pouches.
Beschikbaarheid: 2 Op voorraad
The LT468 inner Belt is the slimmer version of the classic LT465 inner Belt from Lindnerhof. Instead of 50 mm, it is 35 mm wide and therefore fits many different models of combat pants as well as most civilian ones.
Beschikbaarheid: 1 Op voorraad
The Caiman Bump Helmet System is built on an advanced reinforced polymer shell and is designed for the rigors of maritime and mobile maneuvers.
Beschikbaarheid: 2 Op voorraad
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
Beschikbaarheid: 5 Op voorraad
The Back Panel MOLLE allows users to create hot-swappable load-outs for the back of their FCPC V5 or Slickster MOLLE when equipped with our MOLLE Zipper Kit.
Beschikbaarheid: Niet op voorraad
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
Beschikbaarheid: 1 Op voorraad
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
Beschikbaarheid: Niet op voorraad
3 layered goretex jacket for the most extreme conditions you can imagine!
Beschikbaarheid: 3 Op voorraad
The Admin Pouch by BFG keeps administrative and everyday useful items close at hand in a lightweight, low profile utility pouch.