English
Beschikbaarheid: 2 Op voorraad
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
Welkom op de website van Batavi Tactical Solutions
Nederlands
FirstSpear STT Plate carrier multicam
- Write a review
€ 299,00
Inclusief belasting
Geleverd binnen 3 - 4 werkdagen
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
FirstSpear STT Plate Carrier + cummerbund!
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
The plate pockets are sized to handle most shooters cut 10" x 12" commercial armor plates, as well as Medium ESAPI/Ceradyne plates (L or XL ESAPI will NOT fit). The bottom flap pushes the plate to the top of the pocket to keep your armor in its proper place over your upper thoracic region. Exclusive to this STT Plate Carrier is the integration of loop velcro strips on the front and back carriers for option of adding PIG AFC Pontoons for increased air flow and padded goodness.
We are offering 3 different cummerbund sizes to maximize fit. Measure your chest around the widest part (usually at nipple height) and it should correspond with your jacket size if you know it. Compare that measurement with the sizes below to select your cummerbund.
S/M: 38"-44" (can hold 6" x 9" soft armor )
M/L: 42"-48" (can hold 6" x 9" soft armor)
L/XL: 48"-52" (can hold soft armor up to 6" x 12" wide)
If you are in between 2 sizes we recommend trying the smaller of the two sizes first. These sizing suggestions are general guidelines. There are multiple variables in play that make fitting armor an imperfect process at best but this will put most people into the size they need to be.
The M/L and L/XL cummerbunds have elastic for up to 2" of additional stretch. The thickness of your plates and whether you are running any soft armor will also affect the sizing and fit. Adding PIG AFC Pontoons will reduce the size and fit considerably.
FS STT
2 Items
Je bent misschien ook geïnteresseerd in
Beschikbaarheid: Niet op voorraad
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
Beschikbaarheid: Niet op voorraad
Based on the low profile front flap of the JPC and CPC. This detachable flap attaches to the front platebag of the JPC or AVS (Standard or MBAV) to provide three M4 mag pouches. Includes three shock-cord magazine retention straps.
Beschikbaarheid: 3 Op voorraad
Attaches to front platebag of JPC or AVS (Standard or MBAV) to provide three M4 mag pouches.
Beschikbaarheid: 2 Op voorraad
Made from 3D mesh, these shoulder pads offer extra comfort.
The cushions are delivered as a pair.
Beschikbaarheid: 2 Op voorraad
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
Beschikbaarheid: Niet op voorraad
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
Beschikbaarheid: Niet op voorraad
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
16 andere producten in dezelfde categorie:
Beschikbaarheid: Niet op voorraad
An all-purpose insulation jacket made of Polartec® Wind Pro®, specially designed for tactical use.
Beschikbaarheid: 1 Op voorraad
The outer material of this fleece midlayer is POLARTEC Power Stretch Hardface Fleece, combining high abrasion resistance with optimal elasticity. The inside of this fleece is exceptionally soft and comfortable on the skin, while its durable outside and high breathability makes the hooded pullover a functional companion for demanding activities. Strategically placed flatlock seams on the chest and back create a seamless shoulder area, preventing any uncomfortable pressure points under backpack straps or plate carriers. This Hoody excels both as an integrated component of tactical clothing concepts and as a stand-alone piece for sports and everyday wear.
Beschikbaarheid: 1 Op voorraad
Roll top 3 day assault pack.
Up to 50 liters (+ back panel)
Compatible with Crye Precision back panels. Inform back panel size with order.
2x 1 liter nalgene / canteen pouches
Molle on sides and back
Signal panel / skrim pouch on bottom
Full length zipper
Molle lined interior
Removable hip belt
Internal dual Curv frame
Bladder hose / cable opening to main compartment
Compatible with velcro padding (shown with black aftermarket CP padding)
Shown with Crye Precision zip on back panel (No back panel included)
Alternative closure attachment on sides.
Includes extra straps with click in buckles (”ARS buckles”) that can be used for carrier integration.
Weight 1,1kg / 38oz
Designed for sub-20kg loads
Made from X-pac. NIR-compliant. Made in Finland.
Beschikbaarheid: 2 Op voorraad
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
Beschikbaarheid: 2 Op voorraad
Using laser cut thermoplastic we have achieved a semi rigid cummerbund that increases stability and weight distribution for the operator.
Beschikbaarheid: 2 Op voorraad
The Mag NOW! The pouch is an improved version of the classic “bungee pouch.” This pouch is immediate access open-top magazine pouch that uses moulded rubber “pull tabs” instead of sewn webbing used on traditional bungee pouches.
Beschikbaarheid: Niet op voorraad
A comfortable hoody sweatshirt made of Polartec® Power Stretch®.
Great insulation layer in combination with Serak Sweatshirt or another base layer.
Beschikbaarheid: 2 Op voorraad
The Carry Elastic Cummerbund is a 4" elastic cummerbund designed to hold eight AR magazines
Beschikbaarheid: 5 Op voorraad
The AXL Structural Shoulder Pads are designed for long-term comfort under moderate to heavy loads. By utilizing a structural component over the pad, the weight is always evenly distributed over the entire pad, preventing the shoulder straps of plate carriers from biting into the shoulder under heavier loads and reducing fatigue.
Beschikbaarheid: 7 Op voorraad
The SkullCap™ is a fitted, 3-panel cap, cut for maximum coverage and situational awareness.
Beschikbaarheid: Niet op voorraad
Hooded jacket with full length front zipper, made of synthetic fleece CLIMASHIELD® Apex insulation.
Lightweight, warm and packable jacket.
Beschikbaarheid: 1 Op voorraad
A no melt/no drip materials based under body armour combat shirt that is worn when conducting Direct Action tasks.
Beschikbaarheid: 5 Op voorraad
Sometimes you just don’t have any space to spare. That’s where the DropWing™ comes in. Utilizing vertical MOLLE slots, the DropWing™ allows you to mount things like our SEAR or KSAR horizontally below your plate bag or cummerbund. Additionally, holes are placed along the DropWing™ to utilize the included shock cord/cord locks. This is great for retaining breaching charges or whatever else you can strap down!
Beschikbaarheid: Niet op voorraad
A no melt/no drip materials based under body armour combat shirt that is worn when conducting Direct Action tasks.
Arc`teryx has tweaked many technical refinements for the year 2021. In the Assault Shirt AR Gen 2 this is particularly evident. A successful all-round renewal in terms of design, material and functionality delights with facilitations in use, but also with a flatter profile and thus better comfort.
Beschikbaarheid: 2 Op voorraad
Taiga tropical multicam pants
Beschikbaarheid: 5 Op voorraad
The General Purpose Pocket - 6x5 is designed for carrying items such as NVGs, IFAKs, Flashbangs, and other essential equipment.