Welkom op de website van Batavi Tactical Solutions
Nederlands
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
Fully modular plate carrier
Features standard MOLLE/PALS webbing on the entire front and back
Includes shoulder straps and skeletonised, double 3-row waistbelt made from multiaxial laminate MX material
Provides 3 back-to-back loops for cable management on both the front and back
Includes cut-open bartack seams for cable routing
Features zipper on the back for attaching zip-panels (CP-compatible)
Hook and loop areas on front, back, and insides for pads or additional pouches
Shoulder straps in size M with extra-slim 25mm patented hook buckle
MOLLE slots on shoulder straps for cable management and additional pouches, with length adjustments via hook and loop fastener
Includes loops on shoulder straps and waistbelt compatible with Lindnerhof Taktik backpacks (e.g., HL334 Modular Backpack)
Includes skeletonised waistbelt with 3 rows featuring 10 MOLLE slots each
Waistbelt with patented hook buckle
Size adjustment through shock cord
Compatible with plate size SAPI L (and SAPI M or NATO-standard by using the plate-holding strap)
Allows for attachment of a chest rig (e.g., MX266 + RMPL144)
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
The Heavy Load Carrying System "The beast" efficiently and stably transports a wide range of heavy and unwieldy loads with customisable options tailored to your physique and equipment.
Full featured no melt/no drip technical pant suitable for a variety of combat applications.
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is designed to securely store the magazine for your rifle so you can still quickly pull it out when needed.
The LT562 Curv® Belt Cobra features a reinforced modular design with a cobra buckle, renowned for its ultra-low weight, high impact strength, remarkable flexibility, and exceptional cold-resistant properties.
Full featured no melt/no drip technical pant suitable for conducting direct action tasks.
The LT562 Curv® Belt Cobra features a reinforced modular design with a cobra buckle, renowned for its ultra-low weight, high impact strength, remarkable flexibility, and exceptional cold-resistant properties.
Lightweight softshell material pants for speed and mobility
The LiteFighter® 2 is a lightweight, two-person, three-season tent that provides excellent protection against bugs, inclement weather, and pests during your outdoor adventures. The Litefighter® 2 combat tent uses the same design, materials, and technology found in the popular Litefighter 1 shelter system, but is built to accommodate two full sized occupants.
Using laser cut thermoplastic we have achieved a semi rigid cummerbund that increases stability and weight distribution for the operator.
The Navboard® FlipLite™ is the natural evolution of S&S Precision’s original FlipLite™ offering enhanced durability and performance. Molded with impact modified Nylon, the NavBoard® FlipLIte™ is a case agnostic mobile device mounting platform enabling users to utilize their preferred case. The mobile device is secured to the device panel via silicone retention straps featuring internal ribbing to prevent the straps from peeling off the user's mobile device.
Made from 3D mesh, these shoulder pads offer extra comfort.
The cushions are delivered as a pair.
The PRG series was designed for wet and cold conditions. It combines waterproof and windproof protection with comfort and durability. The robust outer material is so breathable so that it can be worn comfortably even during activity.
Lightweight non-membrame softshell pants for maximum mobility when its needed most.
The Ferro Concepts FCPC V5 Base is the pinnacle of lightweight and versatile plate carrier design, honed over a decade of innovation. This advanced plate carrier is ideal for special operations, offering unparalleled adaptability and durability. Whether in the field or in demanding environments, the FCPC V5 ensures optimal performance and comfort.
The Radio Pouch MX132 provides a customizable solution for the secure storage of a variety of medium-sized radios. Constructed from ultra-lightweight MX multiaxial laminate, it provides optimum support for your radio and weighs just 50 grams.
English
