Welkom op de website van Batavi Tactical Solutions
Nederlands
The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, hook & loop, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile.
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, hook & loop, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile.
Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop field sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines.
This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines.
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
The MX762-1 securely holds a 9mm double-stack pistol magazine. Its minimalist design makes the MX762-1 exceptionally lightweight and provides additional flexibility in choosing the closure system best-suited to mission requirements.
The Multi-Calibre SMG Mag Pouch MX519 is specially developed for MP mags. It reliably stores a variety of mag sizes, ensuring quick access to the magazine.
The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is designed to securely store the magazine for your rifle so you can still quickly pull it out when needed.
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The BOSS Rugby shirt offers cutting-edge features like a modern rugby collar, UV protection, and Odorexx™ antimicrobial treatment. Designed with dynamic stretch and recovery, this shirt provides unmatched comfort and performance. Upgrade your tactical gear with the BOSS Rugby from Velocity Systems now!
Using laser cut thermoplastic we have achieved a semi rigid cummerbund that increases stability and weight distribution for the operator.
Tilak operator pants multicam
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
The Rapid Access Trauma System (RATS) frontline medic bag is designed for quick, one-handed access to important medical supplies and features the optional Bolstered Ventilation and Stability (BVS) system.
Tilak cap, quick dry, ideal for under helmet use.
The Ferro Concepts FCPC V5 Base is the pinnacle of lightweight and versatile plate carrier design, honed over a decade of innovation. This advanced plate carrier is ideal for special operations, offering unparalleled adaptability and durability. Whether in the field or in demanding environments, the FCPC V5 ensures optimal performance and comfort.
This boonie is designed with multiple pass-throughs for seamless integration with head harnesses, along with eyelet holes for securely attaching an NVG shroud. The oversized fit ensures compatibility with various head harnesses. The pre-worn brim eliminates straight lines for a more natural look, and the adjustable paracord provides a secure fit. Additionally, this cover is NIR compliant.
Ultralight minimalistic plate carrier for soft and hard hard armor!
The ultimate concealment Boonie Hat
Vented top, lightweight and fast drying.
The Ten-Speed Ultralight Dump Pouch redefines dump pouches. Extremely compact, only taking up a 2 x 2 MOLLE field; the bag portion stays folded under Ten-Speed® elastic when not in use.
2-layer goretex paclite jacket, easy packable in your platecarrier for quick acces if needed!
3M MT20H682BB-09 CY PELTOR ComTac V Hearing Defender Headset Neckband
Level Dependant, Electronic Hearing Protection to Help Protect from Impulse and Steady State Noise
The Radio Pouch large MX017 has been designed specifically for the SEM-52 radio, but also allows larger radios to be carried. It is the successor to our popular HL017/2 and PA017-1 radio pouches.
The improved Generation 2 of the PA053/II Multi-Pouch horizontal is now even more lightweight while maintaining the durability of proven materials.
English
