Welkom op de website van Batavi Tactical Solutions
Nederlands
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
Leveringsbeleid
We houden je volledig op de hoogte tijdens het bestelproces.
Retourbeleid
Vanaf het moment dat je de factuur hebt, heb je 7 dagen om het product terug te sturen
Fully modular plate carrier
Features standard MOLLE/PALS webbing on the entire front and back
Includes shoulder straps and skeletonised, double 3-row waistbelt made from multiaxial laminate MX material
Provides 3 back-to-back loops for cable management on both the front and back
Includes cut-open bartack seams for cable routing
Features zipper on the back for attaching zip-panels (CP-compatible)
Hook and loop areas on front, back, and insides for pads or additional pouches
Shoulder straps in size M with extra-slim 25mm patented hook buckle
MOLLE slots on shoulder straps for cable management and additional pouches, with length adjustments via hook and loop fastener
Includes loops on shoulder straps and waistbelt compatible with Lindnerhof Taktik backpacks (e.g., HL334 Modular Backpack)
Includes skeletonised waistbelt with 3 rows featuring 10 MOLLE slots each
Waistbelt with patented hook buckle
Size adjustment through shock cord
Compatible with plate size SAPI L (and SAPI M or NATO-standard by using the plate-holding strap)
Allows for attachment of a chest rig (e.g., MX266 + RMPL144)
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
MOG TARGET 8110 HIGH ABRASION ERGOSHIELD GLOVES
The MoG ‘Target shooting glove series’ have been developed together with several dedicated and heavy users within Special Forces and law enforcement during extensive training sessions in different environments.
The Target High Abrasion 8110 is a highly finger-sensitive and slim fit tactical glove equipped with the MoG ArmaSuede and ErgoShield technologies. They are TouchScreen compatible!
Hooded jacket with full length front zipper, made of synthetic fleece CLIMASHIELD® Apex insulation.
Lightweight, warm and packable jacket.
AGM PVS-14 NW Multi-Purpose HP Night Vision Monocular Gen 2+ "Photonis Autogated" Manual Gain control ECHO IIT White Phosphor
The MX716 13s shotgun ammunition Panel is designed to securely hold and transport 12g calibre shotgun shells. The loops made of elasticated strap material offer space for 13 shotgun shells.
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
Lindnerhof Alpha tab to secure your mags in place!
A no melt/no drip materials based under body armour combat shirt that is worn when conducting Direct Action tasks.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
The Ten-Speed Extended Doubled Pistol Mag Pouches improves the classic Double Pistol Mag Pouch by lengthening the pouch to accommodate longer extended mags popular with competition shooters, extended base plates, or the longer magazines of the SIG M18.
The LT562 Curv® Belt Cobra features a reinforced modular design with a cobra buckle, renowned for its ultra-low weight, high impact strength, remarkable flexibility, and exceptional cold-resistant properties.
The SE Shikari Grid Leg Loops with quick-release buckle are made of ultra-light mesh material and webbing and offer the user maximum freedom of action. The unique design allows the user to put on and fasten the loops quickly and easily without having to remove the belt.
Roll top 3 day assault pack.
Up to 50 liters (+ back panel)
Compatible with Crye Precision back panels. Inform back panel size with order.
2x 1 liter nalgene / canteen pouches
Molle on sides and back
Signal panel / skrim pouch on bottom
Full length zipper
Molle lined interior
Removable hip belt
Internal dual Curv frame
Bladder hose / cable opening to main compartment
Compatible with velcro padding (shown with black aftermarket CP padding)
Shown with Crye Precision zip on back panel (No back panel included)
Alternative closure attachment on sides.
Includes extra straps with click in buckles (”ARS buckles”) that can be used for carrier integration.
Weight 1,1kg / 38oz
Designed for sub-20kg loads
Made from X-pac. NIR-compliant. Made in Finland.
TYR tactical frontflap for 3 mags and an additional 3 elastic outer sleeves for 3 extra mags or tools!
Suitable for:
-Crye AVS, JPC, CPC, SPC.
-Spiritus systems Lv119
-Tyr tactical carriers
Adaptable with QASM or G-hooks for Ferro Concepts carriers
An extremely versatile pouch intended to be installed on the bottom of our AURA 20 Backpack. Increase its volume while allowing the user to store in one place the goods that need to be quickly reach. Designed with an innovative rapid detachment system and a wide opening for easy access, the pouch can also be worn as a waist bag without removing the backpack. The rear MOLLE attachments also allow the user to attach the pouch on standard MOLLE systems.
The SkullCap™ is a fitted, 3-panel cap, cut for maximum coverage and situational awareness.
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is designed to securely store the magazine for your rifle so you can still quickly pull it out when needed.
English
