Welkom op de website van Batavi Tactical Solutions
Nederlands
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
Leveringsbeleid
We houden je volledig op de hoogte tijdens het bestelproces.
Retourbeleid
Vanaf het moment dat je de factuur hebt, heb je 7 dagen om het product terug te sturen
Fully modular plate carrier
Made from ultra-light multiaxial laminate MX
Features standard laser-cut MOLLE slots on the entire front and back
Includes 3 back-to-back loops for cable management on the front
Incorporates cut-open bartack seams for cable routing
Features a rear zipper for attaching zip-panels (CP-compatible)
Provides hook and loop areas on front, back, and insides for pads or additional pouches
Shoulder straps in size M with extra-slim 25mm patented hook buckle
MOLLE slots on shoulder straps for cable management and additional pouches, with length adjustments via hook and loop fastener
Includes loops on shoulder straps and waistbelt compatible with Lindnerhof Taktik backpacks (e.g., HL334 Modular Backpack)
Includes skeletonised waistbelt with 3 rows featuring 10 MOLLE slots each
Waistbelt with patented hook buckle
Size adjustment through shock cord
Compatible with plate size SAPI L (and SAPI M or NATO-standard by using the plate-holding strap)
Allows for attachment of a chest rig (e.g., MX266 + RMPL144)
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
Made from 3D mesh, these shoulder pads offer extra comfort.
The cushions are delivered as a pair.
The Multi-Calibre Rifle Mag Pouch MX119 is designed to securely hold a variety of rifle magazine sizes. It can accommodate everything from AR15 to HK417, ensuring a reliable hold for your ammunition.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The AXL Structural Shoulder Pads are designed for long-term comfort under moderate to heavy loads. By utilizing a structural component over the pad, the weight is always evenly distributed over the entire pad, preventing the shoulder straps of plate carriers from biting into the shoulder under heavier loads and reducing fatigue.
The Ferro Concepts FCPC V5 Base is the pinnacle of lightweight and versatile plate carrier design, honed over a decade of innovation. This advanced plate carrier is ideal for special operations, offering unparalleled adaptability and durability. Whether in the field or in demanding environments, the FCPC V5 ensures optimal performance and comfort.
The Mayflower UW Chest Rig Gen IV is a low-profile mission focused vest
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
MOG TARGET 8111B LIGHT DUTY GLOVES
The MoG ‘Target shooting glove series’ have been developed together with several dedicated and heavy users within Special Forces and law enforcement during extensive training sessions in different environments.
The Target – Light Duty 8111 is a ultra thin 0.6mm, slim fit and high finger sensitive glove that wraps around your hand like a second skin. A real trailblazer within this segment of gloves. This light duty gloves is equipped with MoG DexSuede technology.
The ultimate concealment Boonie Hat
Vented top, lightweight and fast drying.
The STEINER T-Sights are tough, compact optics especially suited for AR platforms. Due to the optional 3x, 4x or 5x magnification paired with the illuminated STEINER Rapid Dot Reticle, the user is enabled to quickly acquire fast moving targets as well as close-up targets.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The AXL Structural Shoulder Pads are designed for long-term comfort under moderate to heavy loads. By utilizing a structural component over the pad, the weight is always evenly distributed over the entire pad, preventing the shoulder straps of plate carriers from biting into the shoulder under heavier loads and reducing fatigue.
Full featured no melt/no drip technical pant suitable for a variety of combat applications.
The Navboard® FlipLite™ is the natural evolution of S&S Precision’s original FlipLite™ offering enhanced durability and performance. Molded with impact modified Nylon, the NavBoard® FlipLIte™ is a case agnostic mobile device mounting platform enabling users to utilize their preferred case. The mobile device is secured to the device panel via silicone retention straps featuring internal ribbing to prevent the straps from peeling off the user's mobile device.
The Rapid Access Trauma System (RATS) frontline medic bag is designed for quick, one-handed access to important medical supplies and features the optional Bolstered Ventilation and Stability (BVS) system.
The newly redesigned Rapid Access Trauma System (RATS) pack is a frontline medic bag whose every detail is focused on quick, one-handed access to organized medical supplies. There are multiple trauma shears and tourniquet holders throughout and large reinforced handles for hanging the pack on branches or inside of helicopters. It’s sized so that when mounted on the NICE Frame, there is room below the pack for carrying litters or hydraulic combi tools. Inside the RATS are four removable pockets with clear vinyl windows and two IV bag pockets. The RATS also features removable BVS that optimizes the pack for use with or without body armor.
The MX116 Admin Pouch provides secure and easy storage for maps and communication devices. Constructed from durable, lightweight Multiaxial Laminate MX, it features a removable map pocket and adjustable holding surface for optimum organisation.
The Back Panel MOLLE allows users to create hot-swappable load-outs for the back of their FCPC V5 or Slickster MOLLE when equipped with our MOLLE Zipper Kit.
The Blackfolium HYBRID Mag Pouch is a simple but effective carrying system for up to 6x shotgun ammunition. The composite plates known from the 8-Lock series provide high rigidity so that the ammunition has a secure hold. The Mag Pouch can be attached to all plush velcro surfaces.
The Lindnerhof Fixation Strap Rifle LT278 is an elastic safety strap with quick release for secure fixation of the long gun
Similar to its predecessor, the Burrito Bag is a near-universal, low-profile solution to add admin pouch capability behind industry-standard SwiftClip and G-Hook placards. It is designed to give users the ability to have a side-access admin. The Burrito Bag attaches between the two side release buckles used on carriers and placard adapters. When empty, it adds little to no additional bulk to the front of your carrier.
Roll top 3 day assault pack.
Up to 50 liters (+ back panel)
Compatible with Crye Precision back panels. Inform back panel size with order.
2x 1 liter nalgene / canteen pouches
Molle on sides and back
Signal panel / skrim pouch on bottom
Full length zipper
Molle lined interior
Removable hip belt
Internal dual Curv frame
Bladder hose / cable opening to main compartment
Compatible with velcro padding (shown with black aftermarket CP padding)
Shown with Crye Precision zip on back panel (No back panel included)
Alternative closure attachment on sides.
Includes extra straps with click in buckles (”ARS buckles”) that can be used for carrier integration.
Weight 1,1kg / 38oz
Designed for sub-20kg loads
Made from X-pac. NIR-compliant. Made in Finland.
The Spec Ops Delta Gen II helmet is the latest addition to United Shields Special Operator Helmet range. It is made from advanced Aramid composites and provides lightweight robust protection from ballistic and fragmentation projectiles as well as other low energy threats.
The Arc'teryx LEAF Cold WX Zip Neck AR is a high performance long sleeve shirt, which is ideal as a warming base layer. Thanks to the superior material and the functional zip collar, the Cold WX Zip Neck AR guarantees thermal efficiency, optimal ventilation and excellent moisture management.
English
