Welkom op de website van Batavi Tactical Solutions
Nederlands
The AXL Structural Shoulder Pads are designed for long-term comfort under moderate to heavy loads. By utilizing a structural component over the pad, the weight is always evenly distributed over the entire pad, preventing the shoulder straps of plate carriers from biting into the shoulder under heavier loads and reducing fatigue.
Leveringsbeleid
We houden je volledig op de hoogte tijdens het bestelproces.
Retourbeleid
Vanaf het moment dat je de factuur hebt, heb je 7 dagen om het product terug te sturen
Features:
Added adjustability for proper armor placement on the body
Improves function of quick-release systems
Integrated cable routing
Trifold flap access for ease of plate height and ride adjustment
Structurally supported pad for long-term comfort carrying heavy loads
Compatible with:
Spiritus Systems LV-119
All Ferro Concepts Carriers
Crye JPC™, and AirLite® SPC™
S&S Plate frame
First Spear Plate Carriers
Velocity Systems Scarab & Mayflower APC
Many other standard-sized shoulder straps no wider than 2.5" (Eagle, SKD, LBT)
Made in America
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
Made from 3D mesh, these shoulder pads offer extra comfort.
The cushions are delivered as a pair.
The LT978 sling is tailored for a range of assault rifles, featuring adjustable length and an elastic component for enhanced comfort. The cobra buckle enables rapid weapon attachment and detachment.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
The MX106 is a compact and lightweight sling designed for a variety of assault rifles, attaching securely to the shoulder strap. It features a quick-release buckle for effortless weapon detachment and reattachment, ensuring your rifle is always within reach.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
AXL Equinox Cummerbund: Rigid Yet Lightweight Tactical Support with Quick-Release FirstSpear® Tubes™ Integration
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
The design that started a movement. When we developed the first version of our signature shirt, we had no idea that it would lead to such widespread adoption of our basic design. The G3 COMBAT SHIRT™ is a combat-specific garment specifically designed to be worn under body armor. It keeps you cool with wicking, lightweight, high-performance, flame-resistant DRIFIRE® torso fabric and reinforced Mil-Spec 50/50 NYCO ripstop sleeves. Designed for use with our patented removable AIRFLEX™ ELBOW PADS (sold separately). The G3 COMBAT SHIRT™ features a zip collar that allows easy donning and doffing while keeping slings, straps, and brass off your neck. Patented, see www.lwpatents.com. Made in US from US materials.
The BOSS Rugby shirt offers cutting-edge features like a modern rugby collar, UV protection, and Odorexx™ antimicrobial treatment. Designed with dynamic stretch and recovery, this shirt provides unmatched comfort and performance. Upgrade your tactical gear with the BOSS Rugby from Velocity Systems now!
Lindnerhof Alpha tab to secure your mags in place!
The BOSS Rugby shirt offers cutting-edge features like a modern rugby collar, UV protection, and Odorexx™ antimicrobial treatment. Designed with dynamic stretch and recovery, this shirt provides unmatched comfort and performance. Upgrade your tactical gear with the BOSS Rugby from Velocity Systems now!
With decades of personal operational experience, Level Peaks Associates have developed the World’s most advanced battle smock. Different to anything else on the market, this technically advance smock incorporates all the latest design ideas into one garment, tailor made for the current operating environment.
The Wilcox G24 is the industry standard in night vision mounts. The G24 features a low-profile, breakaway design, which protects the operators neck in impacts, while securely attaching to the majority of commercially available shrouds. The G24 is made from aerospace grade metal, weighs only 5.76 oz, and has a wide range of adjustments to ensure correct placement of the NVG.
Here’s something epic you don’t see every year. A unique modular electronic warfare backpack designed to carry the Thor III IED jammer. If you don’t need to watch out for roadside bombs, you can use this very versatile and super customizable pack for hauling all sorts of heavy crap. Made in the USA.
A comfortable hoody sweatshirt made of Polartec® Power Stretch®.
Great insulation layer in combination with Serak Sweatshirt or another base layer.
The True North Concepts Modular Holster Adaptor (MHA) is designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adaptors by clamping the belt between an aluminum adapter and aluminum belt bars.
The PRG series was designed for wet and cold conditions. It combines waterproof and windproof protection with comfort and durability. The robust outer material is so breathable so that it can be worn comfortably even during activity.
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is a woven holster that is elastic yet ensures a snug fit for the magazine. It can be attached to standard MOLLE/PALS and Micro-PALS (commonly used on rescue belts). With the help of Blackfolium's Stick Angles adapter, you can also attach the magazine to your gear at an angle. The pouch design ensures perfect storage of popular magazines such as 5.56 STANAG, 7.72 and many more. The removable bungee cord with pull tab allows you to additionally secure the magazine from the top.
The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, hook & loop, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile.
The Mayflower UW Chest Rig Gen IV is a low-profile mission focused vest
The Arc'teryx LEAF Cold WX Zip Neck AR is a high performance long sleeve shirt, which is ideal as a warming base layer. Thanks to the superior material and the functional zip collar, the Cold WX Zip Neck AR guarantees thermal efficiency, optimal ventilation and excellent moisture management.
Comtac fuzz / velcro covers with skins to protect your headset and secure cables.
An extremely versatile pouch intended to be installed on the bottom of our AURA 20 Backpack. Increase its volume while allowing the user to store in one place the goods that need to be quickly reach. Designed with an innovative rapid detachment system and a wide opening for easy access, the pouch can also be worn as a waist bag without removing the backpack. The rear MOLLE attachments also allow the user to attach the pouch on standard MOLLE systems.
English
