Welcome on the webshop of Batavi Tactical Solutions
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
Shipping and delivery
We will keep you fully informed about during the order process.
Return Policy
After the day of receipt of the order you have 7 days to return the purchase.
Fully modular plate carrier
Made from ultra-light multiaxial laminate MX
Features standard laser-cut MOLLE slots on the entire front and back
Includes 3 back-to-back loops for cable management on the front
Incorporates cut-open bartack seams for cable routing
Features a rear zipper for attaching zip-panels (CP-compatible)
Provides hook and loop areas on front, back, and insides for pads or additional pouches
Shoulder straps in size M with extra-slim 25mm patented hook buckle
MOLLE slots on shoulder straps for cable management and additional pouches, with length adjustments via hook and loop fastener
Includes loops on shoulder straps and waistbelt compatible with Lindnerhof Taktik backpacks (e.g., HL334 Modular Backpack)
Includes skeletonised waistbelt with 3 rows featuring 10 MOLLE slots each
Waistbelt with patented hook buckle
Size adjustment through shock cord
Compatible with plate size SAPI L (and SAPI M or NATO-standard by using the plate-holding strap)
Allows for attachment of a chest rig (e.g., MX266 + RMPL144)
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The MX301 Medic Pouch is a horizontally mounted pouch for first aid supplies with quick access from all sides. Its removable interior provides compartments for improved organisation and can be unfolded while the sleeve remains attached to your carrying system.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
Made from 3D mesh, these shoulder pads offer extra comfort.
The cushions are delivered as a pair.
Experience reliable and safe storage of a hand grenade with the Grenade Pouch MX007. Its durable material, secure features, and design focusing on ease of use ensure optimal performance and reliability.
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
Optimized to conceal your face/optic without snag
Using laser cut thermoplastic we have achieved a semi rigid cummerbund that increases stability and weight distribution for the operator.
The LT562 Curv® Belt Cobra features a reinforced modular design with a cobra buckle, renowned for its ultra-low weight, high impact strength, remarkable flexibility, and exceptional cold-resistant properties.
The Rapid Access Trauma System (RATS) frontline medic bag is designed for quick, one-handed access to important medical supplies and features the optional Bolstered Ventilation and Stability (BVS) system.
The newly redesigned Rapid Access Trauma System (RATS) pack is a frontline medic bag whose every detail is focused on quick, one-handed access to organized medical supplies. There are multiple trauma shears and tourniquet holders throughout and large reinforced handles for hanging the pack on branches or inside of helicopters. It’s sized so that when mounted on the NICE Frame, there is room below the pack for carrying litters or hydraulic combi tools. Inside the RATS are four removable pockets with clear vinyl windows and two IV bag pockets. The RATS also features removable BVS that optimizes the pack for use with or without body armor.
Lightweight FR Cooling Mesh Balaclava, coyote brown.
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
2 MOA dot size
50,000 hours (over 5 years) of constant operation
1 Off position, 4 night vision compatible settings, and 8 daylight settings
Weight 3.0 oz / 84 g (sight only)
Submersible to 80 feet (25 meters)
Advanced optical lenses for enhanced light transmission and ultimate dot clarity
INCLUDES: Flip-Up lens covers, CR2032 battery, Micro tool
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is a woven holster that is elastic yet ensures a snug fit for the magazine. It can be attached to standard MOLLE/PALS and Micro-PALS (commonly used on rescue belts). With the help of Blackfolium's Stick Angles adapter, you can also attach the magazine to your gear at an angle. The pouch design ensures perfect storage of popular magazines such as 5.56 STANAG, 7.72 and many more. The removable bungee cord with pull tab allows you to additionally secure the magazine from the top.
2 in 1 product: The Edelrid & Lindnerhof Shikari Grid Waist Harness Cobra is an ultralight warbelt, in this version with Cobra Buckle, with approval for a sit harness in combination with Shikari Grid Leg Loops (sold separately).
A no melt/no drip materials based under body armour combat shirt that is worn when conducting Direct Action tasks.
The Mini Dangler® drop pouch is a lower profile version of the original and popular Dangler® pouch.
The MX762-2 is designed to safely store two double-stack 9mm pistol magazines. Thanks to its minimalist design, the MX762-2 is particularly light and offers additional flexibility in the choice of closure to perfectly adapt to the requirements of the application.
A very lightweight & and packable wind resistant jacket.
Looser fit and two roomy pockets for diverse activities and conditions.
Goretex 3-layer pants for the most hostile environments.
Roll top 3 day assault pack.
Up to 50 liters (+ back panel)
Compatible with Crye Precision back panels. Inform back panel size with order.
2x 1 liter nalgene / canteen pouches
Molle on sides and back
Signal panel / skrim pouch on bottom
Full length zipper
Molle lined interior
Removable hip belt
Internal dual Curv frame
Bladder hose / cable opening to main compartment
Compatible with velcro padding (shown with black aftermarket CP padding)
Shown with Crye Precision zip on back panel (No back panel included)
Alternative closure attachment on sides.
Includes extra straps with click in buckles (”ARS buckles”) that can be used for carrier integration.
Weight 1,1kg / 38oz
Designed for sub-20kg loads
Made from X-pac. NIR-compliant. Made in Finland.
Nederlands
