





Welcome on the webshop of Batavi Tactical Solutions
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
Nog aan te passen
Nog aan te passen
(bewerken met de module Klantenverzekering)
2 column wide molle attachment. Flap can be tucked in for open top use.
Fits:
- m67 frag
- hand cuffs
- 40mm x46
Weight 43g
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
Full featured no melt/no drip technical pant suitable for a variety of combat applications.
Using laser cut thermoplastic we have achieved a semi rigid cummerbund that increases stability and weight distribution for the operator.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
Conceal the most visible and recognizable piece of your kit
The only customizable helmet scrim on the market.
Based on the low profile front flap of the JPC and CPC. This detachable flap attaches to the front platebag of the JPC or AVS (Standard or MBAV) to provide three M4 mag pouches. Includes three shock-cord magazine retention straps.
With decades of personal operational experience, Level Peaks Associates have developed the World’s most advanced battle smock. Different to anything else on the market, this technically advance smock incorporates all the latest design ideas into one garment, tailor made for the current operating environment.
The Caiman Bump Helmet System is built on an advanced reinforced polymer shell and is designed for the rigors of maritime and mobile maneuvers.
High quality, lightweight softshell jacket in multicam.
The Blackfolium stratos belt is due to his thermoplastic core low weight and slim. Including riggers attachment to secure yourself in certain situations!
The Mortar Gunner Pack Kit features two small ammo pouches and a pair of WR Straps so that the gunner can attach the cannon to the MOLLE Panel. Add in the Frameset, Raid Pack (45L) and Hydrosleeve, and the Mortar Gunner has everything needed for load carriage.
Lindnerhof Alpha tab to secure your mags in place!
The Ferro X Pig (FDT) Delta FR Glove is a minimally designed glove that pays homage to the once loved Nomex Flight Glove. Featuring full-touch screen compatibility, and a high level of dexterity. Fold-over finger construction eliminates fingertip discomfort and the single-layer palm gives great tactile sensitivity. Additionally these gloves are constructed out of Nomex® flame resistant material.
The Multi-Calibre Rifle Mag Pouch MX119 is designed to securely hold a variety of rifle magazine sizes. It can accommodate everything from AR15 to HK417, ensuring a reliable hold for your ammunition.
Silver lite is extremly light material with only 140g/m2. Combination of 78% of Polyamid and 22% of Polyester without using elastane is extremly breathable and dries very fast. Material prevents peelingand reduces bacteria.
This website uses cookies to ensure you get the best experience on our website