Ferro Concepts 3AC cummerbund

This boonie is designed with multiple pass-throughs for seamless integration with head harnesses, along with eyelet holes for securely attaching an NVG shroud. The oversized fit ensures compatibility with various head harnesses. The pre-worn brim eliminates straight lines for a more natural look, and the adjustable paracord provides a secure fit. Additionally, this cover is NIR compliant.

A superlight, breathable softshell pullover providing weather protection for a variety of high output operational scenarios and environments​. Four-way stretch fabric is abrasion resistant and treated with DWR, delivering a garment that offers high mobility and light wind and rain/snow protection within an exceptionally lightweight package. The half-zip design makes the Gamma SL Anorak compatible with plate carriers and reduces pressure points against the body while allowing heat regulation and venting. The trim articulated fit moves with the body and reduces bulk, meaning it can be worn easily under a second outer layer. The low-profile adjustable hood provides additional weather protection and the IFF patches on each arm feature V-Lite retention loops.

The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements

Hooded jacket with full length front zipper, made of synthetic fleece CLIMASHIELD® Apex insulation.

Lightweight, warm and packable jacket.

WCSIG is a fixed pouch chest rig that is made from high quality mil-spec materials in Finland.

4x double mag pouch (2x5.56, 2x7.62x39, 1x.308)

2x radio pouch (will also fit 1l nalgene or a pistol)

2x general purpose pouch (GP will fit 6x m4 mags each)

- molle on shoulder straps, under mag pouches and on the side of the GP pouches

Chest rig, pull-tabs, shoulder straps and a back strap included.

Shoulder straps are attached with 1” side release buckles and can be changed to any after market straps, including our Adaptive Rig System Bravo.

The base of the rig is laser cut from two pieces of cordura laminate. While lamianate is twice as expensive as regular cordura (of which most rigs afe made from), it reduces the amount of seams which adds durability, reduces manufacturing time and makes the affordable pricing possible. The shock cords wear out after years of use but they are replaceable and the rig will last from father to son.

Upgrade your WCSIG with our Adaptive Rig System Bravo yoke, L4 x EURMED IFAK insert, TQ pouch and frag pouches

Lightweight softshell material pants for speed and mobility

The LT562 Curv® Belt Cobra features a reinforced modular design with a cobra buckle, renowned for its ultra-low weight, high impact strength, remarkable flexibility, and exceptional cold-resistant properties.

Sometimes you just don’t have any space to spare. That’s where the DropWing™ comes in. Utilizing vertical MOLLE slots, the DropWing™ allows you to mount things like our SEAR or KSAR horizontally below your plate bag or cummerbund. Additionally, holes are placed along the DropWing™ to utilize the included shock cord/cord locks. This is great for retaining breaching charges or whatever else you can strap down!

A casual multi-purpose insulated jacket. Insulated with Polartec® Alpha®, providing a high level of breathability.

Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.

The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.

The Mortar Gunner Pack Kit features two small ammo pouches and a pair of WR Straps so that the gunner can attach the cannon to the MOLLE Panel. Add in the Frameset, Raid Pack (45L) and Hydrosleeve, and the Mortar Gunner has everything needed for load carriage.

The Multi-Pouch Horizontal MX053 provides a lightweight, versatile storage solution for your extra gear. Ideal for quick organisation and easy access.

The Rapid Access Trauma System (RATS) frontline medic bag is designed for quick, one-handed access to important medical supplies and features the optional Bolstered Ventilation and Stability (BVS) system.

The newly redesigned Rapid Access Trauma System (RATS) pack is a frontline medic bag whose every detail is focused on quick, one-handed access to organized medical supplies. There are multiple trauma shears and tourniquet holders throughout and large reinforced handles for hanging the pack on branches or inside of helicopters. It’s sized so that when mounted on the NICE Frame, there is room below the pack for carrying litters or hydraulic combi tools. Inside the RATS are four removable pockets with clear vinyl windows and two IV bag pockets. The RATS also features removable BVS that optimizes the pack for use with or without body armor.

The Ferro X Pig (FDT) Delta FR Glove is a minimally designed glove that pays homage to the once loved Nomex Flight Glove. Featuring full-touch screen compatibility, and a high level of dexterity. Fold-over finger construction eliminates fingertip discomfort and the single-layer palm gives great tactile sensitivity. Additionally these gloves are constructed out of Nomex® flame resistant material.

The Back Panel MOLLE allows users to create hot-swappable load-outs for the back of their FCPC V5 or Slickster MOLLE when equipped with our MOLLE Zipper Kit. End users can quickly swap out their Back Panel MOLLE with four tuck tabs and two zippers instead of undoing MOLLE for each item. This opens up the possibility of having several configurations across multiple panels and quickly changing them out on the fly.