Welcome on the webshop of Batavi Tactical Solutions
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
Fully modular plate carrier
Features standard MOLLE/PALS webbing on the entire front and back
Includes shoulder straps and skeletonised, double 3-row waistbelt made from multiaxial laminate MX material
Provides 3 back-to-back loops for cable management on both the front and back
Includes cut-open bartack seams for cable routing
Features zipper on the back for attaching zip-panels (CP-compatible)
Hook and loop areas on front, back, and insides for pads or additional pouches
Shoulder straps in size M with extra-slim 25mm patented hook buckle
MOLLE slots on shoulder straps for cable management and additional pouches, with length adjustments via hook and loop fastener
Includes loops on shoulder straps and waistbelt compatible with Lindnerhof Taktik backpacks (e.g., HL334 Modular Backpack)
Includes skeletonised waistbelt with 3 rows featuring 10 MOLLE slots each
Waistbelt with patented hook buckle
Size adjustment through shock cord
Compatible with plate size SAPI L (and SAPI M or NATO-standard by using the plate-holding strap)
Allows for attachment of a chest rig (e.g., MX266 + RMPL144)
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The Rapid Access Trauma System (RATS) frontline medic bag is designed for quick, one-handed access to important medical supplies and features the optional Bolstered Ventilation and Stability (BVS) system.
The newly redesigned Rapid Access Trauma System (RATS) pack is a frontline medic bag whose every detail is focused on quick, one-handed access to organized medical supplies. There are multiple trauma shears and tourniquet holders throughout and large reinforced handles for hanging the pack on branches or inside of helicopters. It’s sized so that when mounted on the NICE Frame, there is room below the pack for carrying litters or hydraulic combi tools. Inside the RATS are four removable pockets with clear vinyl windows and two IV bag pockets. The RATS also features removable BVS that optimizes the pack for use with or without body armor.
The MX116 Admin Pouch provides secure and easy storage for maps and communication devices. Constructed from durable, lightweight Multiaxial Laminate MX, it features a removable map pocket and adjustable holding surface for optimum organisation.
The performance-oriented MIG 4.0 Jacket was further developed in cooperation with special units, optimizing the cut and reducing the outer seams,by using special materials. High wearing comfort, robust longevity and optimal protection characterize this multifunctional Jacket. The windand water-repellent outer material and the redesigned, adjustable in 2 directions hood makes the Jacket independent from weather conditions.
A no melt/no drip materials based under body armour combat shirt that is worn when conducting Direct Action tasks.
Lightweight and durable multi-purpose trousers made of non-membrane soft shell.
Suitable for military and outdoor activities mainly.
The Carry Elastic Cummerbund is a 4" elastic cummerbund designed to hold eight AR magazines
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
The Ferro X Pig (FDT) Delta FR Glove is a minimally designed glove that pays homage to the once loved Nomex Flight Glove. Featuring full-touch screen compatibility, and a high level of dexterity. Fold-over finger construction eliminates fingertip discomfort and the single-layer palm gives great tactile sensitivity. Additionally these gloves are constructed out of Nomex® flame resistant material.
A very lightweight & and packable wind resistant jacket.
Looser fit and two roomy pockets for diverse activities and conditions.
TYR Tactical ® Quick Release Slotted Mesh Cummerbund includes the Taktic Buckle System which eliminates the need for users to lift the kangaroo flap for donning and doffing.
Beyond A7-F Fereday Jacket Multicam USA Made
Beyond calls their jacket "Fereday" as a tribute to John Fereday, a renowned British mountaineer and explorer who was known for his resilience and dedication to pushing boundaries in extreme environments, particularly in the Arctic regions where Beyond clothing is designed to perform well.
Attaches to front platebag of JPC or AVS (Standard or MBAV) to provide three M4 mag pouches.
The Back Panel MOLLE allows users to create hot-swappable load-outs for the back of their FCPC V5 or Slickster MOLLE when equipped with our MOLLE Zipper Kit. End users can quickly swap out their Back Panel MOLLE with four tuck tabs and two zippers instead of undoing MOLLE for each item. This opens up the possibility of having several configurations across multiple panels and quickly changing them out on the fly.
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
Nederlands
