Welcome on the webshop of Batavi Tactical Solutions
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
Fully modular plate carrier
Features standard MOLLE/PALS webbing on the entire front and back
Includes shoulder straps and skeletonised, double 3-row waistbelt made from multiaxial laminate MX material
Provides 3 back-to-back loops for cable management on both the front and back
Includes cut-open bartack seams for cable routing
Features zipper on the back for attaching zip-panels (CP-compatible)
Hook and loop areas on front, back, and insides for pads or additional pouches
Shoulder straps in size M with extra-slim 25mm patented hook buckle
MOLLE slots on shoulder straps for cable management and additional pouches, with length adjustments via hook and loop fastener
Includes loops on shoulder straps and waistbelt compatible with Lindnerhof Taktik backpacks (e.g., HL334 Modular Backpack)
Includes skeletonised waistbelt with 3 rows featuring 10 MOLLE slots each
Waistbelt with patented hook buckle
Size adjustment through shock cord
Compatible with plate size SAPI L (and SAPI M or NATO-standard by using the plate-holding strap)
Allows for attachment of a chest rig (e.g., MX266 + RMPL144)
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The flagship product of the company made of three-layer GORE-TEX®, designed for use in extreme conditions. Waterproof and extremely durable.
Integrated ventilation system with WaterTight® zippers in the armpits
Laminated zipper garages
Anatomically shaped sleeves
One-touch cuff adjustment
AquaGuard® Vislon front zipper
Two outer pockets, two shoulder pockets
Velcro® mounting points for ID patches
Big hood with one-touch adjusting
Draw cord at the hips
Laminated brim
Anatomic hem
Share
Enhance your gear with the LT316 Smartphone Holder, designed for secure and quick attachment, for example to the MX116 Admin Panel, ensuring easy access to your smartphone at all times.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
The Stackable Ten-Speed M4 Mag Pouch builds on the Ten-Speed Pouches used by the best-of-the-best worldwide and now adds a single row of MOLLE on the front to stack additional pouches.
The Mayflower UW Chest Rig Gen IV is a low-profile mission focused vest
Lightweight non-membrame softshell pants for maximum mobility when its needed most.
The Fight Light PRC-152 Pouch is specifically designed to hold the Harris AN/PRC-152 Falcon III radio.
Hooded jacket with full length front zipper, made of synthetic fleece CLIMASHIELD® Apex insulation.
Lightweight, warm and packable jacket.
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is designed to securely store the magazine for your rifle so you can still quickly pull it out when needed.
The Horizontal Ten-Speed M4 Mag Pouch combines the tried and true Ten-Speed M4 mag pouch with an unconventional carry position for more versatility in ammunition carrying. Built with the same military grade elastic as the Ten-Speed M4 Magazine Pouch but with a horizontal orientation to fit on an otherwise unused section of MOLLE webbing on a plate carrier, vest, or belt.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
The Radio Pouch MX132 provides a customizable solution for the secure storage of a variety of medium-sized radios. Constructed from ultra-lightweight MX multiaxial laminate, it provides optimum support for your radio and weighs just 50 grams.
The MX762-2 is designed to safely store two double-stack 9mm pistol magazines. Thanks to its minimalist design, the MX762-2 is particularly light and offers additional flexibility in the choice of closure to perfectly adapt to the requirements of the application.
Nederlands
