Welkom op de website van Batavi Tactical Solutions
Nederlands
The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, hook & loop, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile.
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, hook & loop, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile.
Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop field sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines.
This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines.
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
The MX762-1 securely holds a 9mm double-stack pistol magazine. Its minimalist design makes the MX762-1 exceptionally lightweight and provides additional flexibility in choosing the closure system best-suited to mission requirements.
The Multi-Calibre SMG Mag Pouch MX519 is specially developed for MP mags. It reliably stores a variety of mag sizes, ensuring quick access to the magazine.
The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is designed to securely store the magazine for your rifle so you can still quickly pull it out when needed.
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
The SkullCap™ is a fitted, 3-panel cap, cut for maximum coverage and situational awareness.
For reliable fastening, the Bison Belt is equipped with a tried and true D-Ring Cobra® buckle. The inside of the belt is lined with hook Velcro for quick and secure don/doff capability with the included inner pant belt which completes the Bison Belt system.
The LT562 Curv® Belt Cobra features a reinforced modular design with a cobra buckle, renowned for its ultra-low weight, high impact strength, remarkable flexibility, and exceptional cold-resistant properties.
The LT241 Tourniquet Adapter ensures your tourniquet (e.g., CAT Gen. 7) is securely carried and immediately accessible, enhancing your readiness for any critical situation.
Lindnerhof Alpha tab to secure your mags in place!
WCSIG is a fixed pouch chest rig that is made from high quality mil-spec materials in Finland.
4x double mag pouch (2x5.56, 2x7.62x39, 1x.308)
2x radio pouch (will also fit 1l nalgene or a pistol)
2x general purpose pouch (GP will fit 6x m4 mags each)
- molle on shoulder straps, under mag pouches and on the side of the GP pouches
Chest rig, pull-tabs, shoulder straps and a back strap included.
Shoulder straps are attached with 1” side release buckles and can be changed to any after market straps, including our Adaptive Rig System Bravo.
The base of the rig is laser cut from two pieces of cordura laminate. While lamianate is twice as expensive as regular cordura (of which most rigs afe made from), it reduces the amount of seams which adds durability, reduces manufacturing time and makes the affordable pricing possible. The shock cords wear out after years of use but they are replaceable and the rig will last from father to son.
Upgrade your WCSIG with our Adaptive Rig System Bravo yoke, L4 x EURMED IFAK insert, TQ pouch and frag pouches
Enhance your Badger Hood or Ghillie Suit with these lightweight mesh strips
The Lindnerhof Fixation Strap Rifle LT278 is an elastic safety strap with quick release for secure fixation of the long gun
A casual multi-purpose insulated jacket. Insulated with Polartec® Alpha®, providing a high level of breathability.
2 column wide molle attachment. Flap can be tucked in for open top use.
Fits:
- m67 frag
- hand cuffs
- 40mm x46
Weight 43g
Using laser cut thermoplastic we have achieved a semi rigid cummerbund that increases stability and weight distribution for the operator.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
3M MT20H682BB-09 CY PELTOR ComTac V Hearing Defender Headset Neckband
Level Dependant, Electronic Hearing Protection to Help Protect from Impulse and Steady State Noise
Silver lite is extremly light material with only 140g/m2. Combination of 78% of Polyamid and 22% of Polyester without using elastane is extremly breathable and dries very fast. Material prevents peelingand reduces bacteria.
Lightweight non-membrame softshell pants for maximum mobility when its needed most.
The True North Concepts Modular Holster Adaptor (MHA) is designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adaptors by clamping the belt between an aluminum adapter and aluminum belt bars.
English
