Nederlands
Availability: 2 In Stock
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
Welcome on the webshop of Batavi Tactical Solutions
FirstSpear STT Plate carrier multicam
- Write a review
€299.00
Tax included
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
FirstSpear STT Plate Carrier + cummerbund!
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
The plate pockets are sized to handle most shooters cut 10" x 12" commercial armor plates, as well as Medium ESAPI/Ceradyne plates (L or XL ESAPI will NOT fit). The bottom flap pushes the plate to the top of the pocket to keep your armor in its proper place over your upper thoracic region. Exclusive to this STT Plate Carrier is the integration of loop velcro strips on the front and back carriers for option of adding PIG AFC Pontoons for increased air flow and padded goodness.
We are offering 3 different cummerbund sizes to maximize fit. Measure your chest around the widest part (usually at nipple height) and it should correspond with your jacket size if you know it. Compare that measurement with the sizes below to select your cummerbund.
S/M: 38"-44" (can hold 6" x 9" soft armor )
M/L: 42"-48" (can hold 6" x 9" soft armor)
L/XL: 48"-52" (can hold soft armor up to 6" x 12" wide)
If you are in between 2 sizes we recommend trying the smaller of the two sizes first. These sizing suggestions are general guidelines. There are multiple variables in play that make fitting armor an imperfect process at best but this will put most people into the size they need to be.
The M/L and L/XL cummerbunds have elastic for up to 2" of additional stretch. The thickness of your plates and whether you are running any soft armor will also affect the sizing and fit. Adding PIG AFC Pontoons will reduce the size and fit considerably.
FS STT
2 Items
You might also like
Availability: Out of stock
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
Availability: Out of stock
Based on the low profile front flap of the JPC and CPC. This detachable flap attaches to the front platebag of the JPC or AVS (Standard or MBAV) to provide three M4 mag pouches. Includes three shock-cord magazine retention straps.
Availability: 3 In Stock
Attaches to front platebag of JPC or AVS (Standard or MBAV) to provide three M4 mag pouches.
Availability: 2 In Stock
Made from 3D mesh, these shoulder pads offer extra comfort.
The cushions are delivered as a pair.
Availability: 2 In Stock
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
Availability: Out of stock
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
Availability: Out of stock
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
16 other products in the same category:
Availability: Out of stock
AGM PVS-14 NW Multi-Purpose HP Night Vision Monocular Gen 2+ "Photonis Autogated" Manual Gain control ECHO IIT White Phosphor
Availability: 1 In Stock
The LiteFighter® 2 is a lightweight, two-person, three-season tent that provides excellent protection against bugs, inclement weather, and pests during your outdoor adventures. The Litefighter® 2 combat tent uses the same design, materials, and technology found in the popular Litefighter 1 shelter system, but is built to accommodate two full sized occupants.
Availability: 4 In Stock
The Vickers Combat Applications Sling™ has revolutionized the way we carry automatic rifles. Developed with industry friend, expert, and former 1st SFOD-Delta operational member Larry Vickers and author of the Vickers Guide series of firearms books, the Vickers Sling™ incorporates key features from real world experience that makes the two point sling effective and durable
Availability: 3 In Stock
The SkullCap™ is a fitted, 3-panel cap, cut for maximum coverage and situational awareness.
Availability: Out of stock
The BOSS Rugby shirt offers cutting-edge features like a modern rugby collar, UV protection, and Odorexx™ antimicrobial treatment. Designed with dynamic stretch and recovery, this shirt provides unmatched comfort and performance. Upgrade your tactical gear with the BOSS Rugby from Velocity Systems now!
Availability: 10 In Stock
The Ten-Speed Ultralight Dump Pouch redefines dump pouches. Extremely compact, only taking up a 2 x 2 MOLLE field; the bag portion stays folded under Ten-Speed® elastic when not in use.
Availability: 3 In Stock
Attaches to front platebag of JPC or AVS (Standard or MBAV) to provide three M4 mag pouches.
Availability: 5 In Stock
Availability: 3 In Stock
3M MT20H682BB-09 CY PELTOR ComTac V Hearing Defender Headset Neckband
Level Dependant, Electronic Hearing Protection to Help Protect from Impulse and Steady State Noise
Availability: Out of stock
Goretex 3-layer pants for the most hostile environments.
Availability: 1 In Stock
The Mortar Gunner Pack Kit features two small ammo pouches and a pair of WR Straps so that the gunner can attach the cannon to the MOLLE Panel. Add in the Frameset, Raid Pack (45L) and Hydrosleeve, and the Mortar Gunner has everything needed for load carriage.
Availability: 2 In Stock
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
Availability: 1 In Stock
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
Availability: 1 In Stock
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
Availability: Out of stock
An all-purpose insulation jacket made of Polartec® Wind Pro®, specially designed for tactical use.
Availability: Out of stock
Based on the low profile front flap of the JPC and CPC. This detachable flap attaches to the front platebag of the JPC or AVS (Standard or MBAV) to provide three M4 mag pouches. Includes three shock-cord magazine retention straps.