Welcome on the webshop of Batavi Tactical Solutions
WCSIG is a fixed pouch chest rig that is made from high quality mil-spec materials in Finland.
4x double mag pouch (2x5.56, 2x7.62x39, 1x.308)
2x radio pouch (will also fit 1l nalgene or a pistol)
2x general purpose pouch (GP will fit 6x m4 mags each)
- molle on shoulder straps, under mag pouches and on the side of the GP pouches
Chest rig, pull-tabs, shoulder straps and a back strap included.
Shoulder straps are attached with 1” side release buckles and can be changed to any after market straps, including our Adaptive Rig System Bravo.
The base of the rig is laser cut from two pieces of cordura laminate. While lamianate is twice as expensive as regular cordura (of which most rigs afe made from), it reduces the amount of seams which adds durability, reduces manufacturing time and makes the affordable pricing possible. The shock cords wear out after years of use but they are replaceable and the rig will last from father to son.
Upgrade your WCSIG with our Adaptive Rig System Bravo yoke, L4 x EURMED IFAK insert, TQ pouch and frag pouches
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
WCSIG is a fixed pouch chest rig that is made from high quality mil-spec materials in Finland.
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The Mayflower UW Chest Rig Gen IV is a low-profile mission focused vest
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
A no melt/no drip materials based under body armour combat shirt that is worn when conducting Direct Action tasks.
The MX634 Modular Radio Pouch is like a small construction kit with many components that can be customised to fit a wide range of communication devices, from smartphones to SEM52 radios. It can be attached to the equipment using either PALS straps or hook and loop areas.
The Mortar Gunner Pack Kit features two small ammo pouches and a pair of WR Straps so that the gunner can attach the cannon to the MOLLE Panel. Add in the Frameset, Raid Pack (45L) and Hydrosleeve, and the Mortar Gunner has everything needed for load carriage.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
The Rapid Access Trauma System (RATS) frontline medic bag is designed for quick, one-handed access to important medical supplies and features the optional Bolstered Ventilation and Stability (BVS) system.
The newly redesigned Rapid Access Trauma System (RATS) pack is a frontline medic bag whose every detail is focused on quick, one-handed access to organized medical supplies. There are multiple trauma shears and tourniquet holders throughout and large reinforced handles for hanging the pack on branches or inside of helicopters. It’s sized so that when mounted on the NICE Frame, there is room below the pack for carrying litters or hydraulic combi tools. Inside the RATS are four removable pockets with clear vinyl windows and two IV bag pockets. The RATS also features removable BVS that optimizes the pack for use with or without body armor.
Meet the GSCI PVS-14C, a revolutionary night vision monocular designed for versatility and adaptability. This compact and lightweight device offers multi-role functionality, serving as a handheld, tripod-mounted, helmet-mounted, or weapon-mounted system. With the option to equip 3x or 5x lenses, it excels in extended-range observations. The PVS-14C features an optional external power port for seamless connectivity to portable power sources. Its manual gain control ensures maximum viewing comfort, making it an ideal choice for various missions and operations.
The Admin Pouch by BFG keeps administrative and everyday useful items close at hand in a lightweight, low profile utility pouch.
Tilak operator pants multicam
A no melt/no drip materials based under body armour combat shirt that is worn when conducting Direct Action tasks.
2 column wide molle attachment. Flap can be tucked in for open top use.
Fits:
- m67 frag
- hand cuffs
- 40mm x46
Weight 43g
The design that started a movement. When we developed the first version of our signature shirt, we had no idea that it would lead to such widespread adoption of our basic design. The G3 COMBAT SHIRT™ is a combat-specific garment specifically designed to be worn under body armor. It keeps you cool with wicking, lightweight, high-performance, flame-resistant DRIFIRE® torso fabric and reinforced Mil-Spec 50/50 NYCO ripstop sleeves. Designed for use with our patented removable AIRFLEX™ ELBOW PADS (sold separately). The G3 COMBAT SHIRT™ features a zip collar that allows easy donning and doffing while keeping slings, straps, and brass off your neck. Patented, see www.lwpatents.com. Made in US from US materials.
The Wilcox L4 Three Hole Shroud fits MICH/ACH and Crye AirFrame helmets drilled with the standard three hole pattern. The L4 three hole shroud creates a solid mounting platform for your Wilcox NVG mount. Available with or without NVG lanyard.
The PTT Holder MX703 provides a secure and practical mounting for push-to-talk (PTT) devices.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The Low Pro GP Pouch was designed to fit the Ten-Speed SF Chest Rig and the Dapper Satchel.
Nederlands
