


Welkom op de website van Batavi Tactical Solutions
The Stackable Ten-Speed M4 Mag Pouch builds on the Ten-Speed Pouches used by the best-of-the-best worldwide and now adds a single row of MOLLE on the front to stack additional pouches.
We houden je volledig op de hoogte tijdens het bestelproces.
Vanaf het moment dat je de factuur hebt, heb je 7 dagen om het product terug te sturen
The Stackable Ten-Speed M4 Mag Pouch builds on the Ten-Speed Pouches used by the best-of-the-best worldwide and now adds a single row of MOLLE on the front to stack additional pouches. The perfect blend of speed and security, Ten-Speed® pouches use military grade elastic combined with ULTRAcomp® high performance laminate to create a multi-use pouch that weighs almost nothing and lays flat when not in use. The ULTRAcomp from the back of pouch is brought under and around to the front of the pouch and sewn to the front elastic and then laser cut creating a single column MOLLE compatible MOLLEminus™ slots. This detail adds one column per magazine pocket and also increases the abrasion resistance of the bottom edge of the pouch when crawling or getting abraded by other gear. The M4 sized Ten-Speed pocket can fit a wide range of items and gear. Sized around a STANAG M4 magazine, it also fits all kinds of AR mags, Magpul mags including the new Gen 3, larger SMG mags such as the UMP or P90, flash bangs, trauma gear, small radios, GPS units, small cans, or any other similar sized items. If it fits, it’s good to go!
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
The Multi-Calibre Rifle Mag Pouch MX119 is designed to securely hold a variety of rifle magazine sizes. It can accommodate everything from AR15 to HK417, ensuring a reliable hold for your ammunition.
The MX922 Multi-Calibre Rifle Mag Pouch, featuring the popular MX119 pouch and an attachable cover, can hold a variety of rifle magazine sizes. It reliably stores ammunition from AR15 to HK417, ensuring quick access to the magazine.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.
Tyr Tactical NIJ level 3A abdomen platform in multicam.
Hooded jacket with full length front zipper, made of synthetic fleece CLIMASHIELD® Apex insulation.
Lightweight, warm and packable jacket.
The Multi-Calibre SMG Mag Pouch MX519 is specially developed for MP mags. It reliably stores a variety of mag sizes, ensuring quick access to the magazine.
The Arc'teryx LEAF Cold WX Zip Neck AR is a high performance long sleeve shirt, which is ideal as a warming base layer. Thanks to the superior material and the functional zip collar, the Cold WX Zip Neck AR guarantees thermal efficiency, optimal ventilation and excellent moisture management.
The Lindnerhof Fixation Strap Rifle LT278 is an elastic safety strap with quick release for secure fixation of the long gun
2 in 1 product: The Edelrid & Lindnerhof Shikari Grid Waist Harness Cobra is an ultralight warbelt, in this version with Cobra Buckle, with approval for a sit harness in combination with Shikari Grid Leg Loops (sold separately).
A superlight, breathable softshell pullover providing weather protection for a variety of high output operational scenarios and environments. Four-way stretch fabric is abrasion resistant and treated with DWR, delivering a garment that offers high mobility and light wind and rain/snow protection within an exceptionally lightweight package. The half-zip design makes the Gamma SL Anorak compatible with plate carriers and reduces pressure points against the body while allowing heat regulation and venting. The trim articulated fit moves with the body and reduces bulk, meaning it can be worn easily under a second outer layer. The low-profile adjustable hood provides additional weather protection and the IFF patches on each arm feature V-Lite retention loops.
Tilak operator pants multicam
The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.
The Rapid Access Trauma System (RATS) frontline medic bag is designed for quick, one-handed access to important medical supplies and features the optional Bolstered Ventilation and Stability (BVS) system.
The newly redesigned Rapid Access Trauma System (RATS) pack is a frontline medic bag whose every detail is focused on quick, one-handed access to organized medical supplies. There are multiple trauma shears and tourniquet holders throughout and large reinforced handles for hanging the pack on branches or inside of helicopters. It’s sized so that when mounted on the NICE Frame, there is room below the pack for carrying litters or hydraulic combi tools. Inside the RATS are four removable pockets with clear vinyl windows and two IV bag pockets. The RATS also features removable BVS that optimizes the pack for use with or without body armor.
The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.
The SE Shikari Grid Leg Loops with quick-release buckle are made of ultra-light mesh material and webbing and offer the user maximum freedom of action. The unique design allows the user to put on and fasten the loops quickly and easily without having to remove the belt.
The Hanger Double Magazine Pouch horizontalMX103 can be easily attached to a plate carrier or chest rig via hook and loop to give you extra storage space. It is the successor to our popular HL104 and LT104 magazine pouches.
Sometimes you just don’t have any space to spare. That’s where the DropWing™ comes in. Utilizing vertical MOLLE slots, the DropWing™ allows you to mount things like our SEAR or KSAR horizontally below your plate bag or cummerbund. Additionally, holes are placed along the DropWing™ to utilize the included shock cord/cord locks. This is great for retaining breaching charges or whatever else you can strap down!
The BOSS Rugby shirt offers cutting-edge features like a modern rugby collar, UV protection, and Odorexx™ antimicrobial treatment. Designed with dynamic stretch and recovery, this shirt provides unmatched comfort and performance. Upgrade your tactical gear with the BOSS Rugby from Velocity Systems now!
1x Adaptive Rig System Split Rig setup with Tango modules
1x ARS buttpack
2x Large GP
2x Double mag pouch
1x L4P x EURMED IFAK insert
This setup will fit up to 22 m4 mags.
The components can be used to build a LBE, split front chest rig or a micro chest rig. The whole setup with fit inside the included ARS CBRN Buttpack.
No mags, meds or radios included. Lifetime guarantee. Made from 500d Cordura laminate. NIR-compliant materials.
The Navboard® FlipLite™ is the natural evolution of S&S Precision’s original FlipLite™ offering enhanced durability and performance. Molded with impact modified Nylon, the NavBoard® FlipLIte™ is a case agnostic mobile device mounting platform enabling users to utilize their preferred case. The mobile device is secured to the device panel via silicone retention straps featuring internal ribbing to prevent the straps from peeling off the user's mobile device.
This website uses cookies to ensure you get the best experience on our website