Welcome on the webshop of Batavi Tactical Solutions
The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, hook & loop, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile.
Shipping and delivery
We will keep you fully informed about during the order process.
Return Policy
After the day of receipt of the order you have 7 days to return the purchase.
The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, hook & loop, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile.
Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop field sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines.
This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines.
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
The MX762-1 securely holds a 9mm double-stack pistol magazine. Its minimalist design makes the MX762-1 exceptionally lightweight and provides additional flexibility in choosing the closure system best-suited to mission requirements.
The Multi-Calibre SMG Mag Pouch MX519 is specially developed for MP mags. It reliably stores a variety of mag sizes, ensuring quick access to the magazine.
The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is designed to securely store the magazine for your rifle so you can still quickly pull it out when needed.
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
The flagship product of the company made of three-layer GORE-TEX®, designed for use in extreme conditions. Waterproof and extremely durable.
Integrated ventilation system with WaterTight® zippers in the armpits
Laminated zipper garages
Anatomically shaped sleeves
One-touch cuff adjustment
AquaGuard® Vislon front zipper
Two outer pockets, two shoulder pockets
Velcro® mounting points for ID patches
Big hood with one-touch adjusting
Draw cord at the hips
Laminated brim
Anatomic hem
Share
Hooded jacket with full length front zipper, made of synthetic fleece CLIMASHIELD® Apex insulation.
Lightweight, warm and packable jacket.
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
The General Purpose Pocket - 6x5 is designed for carrying items such as NVGs, IFAKs, Flashbangs, and other essential equipment.
The Radio Pouch MX132 provides a customizable solution for the secure storage of a variety of medium-sized radios. Constructed from ultra-lightweight MX multiaxial laminate, it provides optimum support for your radio and weighs just 50 grams.
You can integrate any mag pouch into the MX463 Dump Pouch. This provides a space-efficient solution for changing magazines with a single action—insert the old magazine and pull out the new one.
Light and compact, the WML impresses with its high luminosity.
The Spec Ops Delta Gen II helmet is the latest addition to United Shields Special Operator Helmet range. It is made from advanced Aramid composites and provides lightweight robust protection from ballistic and fragmentation projectiles as well as other low energy threats.
The MX634 Modular Radio Pouch is like a small construction kit with many components that can be customised to fit a wide range of communication devices, from smartphones to SEM52 radios. It can be attached to the equipment using either PALS straps or hook and loop areas.
The Stackable Ten-Speed M4 Mag Pouch builds on the Ten-Speed Pouches used by the best-of-the-best worldwide and now adds a single row of MOLLE on the front to stack additional pouches.
NVG Skull Harness is an ultra-lightweight head-mounted platform specifically designed for night vision equipment. Built for tactical operations, this harness offers a perfect balance of comfort, stability, and adaptability, making it ideal for users who need night vision support without the bulk of a helmet.
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
The Hanger Double Magazine Pouch horizontalMX103 can be easily attached to a plate carrier or chest rig via hook and loop to give you extra storage space. It is the successor to our popular HL104 and LT104 magazine pouches.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
AGM PVS-14 NW Multi-Purpose HP Night Vision Monocular Gen 2+ "Photonis Autogated" Manual Gain control ECHO IIT White Phosphor
The Blackfolium MARS G2 Sling Carrying Strap Long Gun can be used as a single or two-point sling and is easily customizable in its use.
Nederlands
