Nederlands
Availability: 2 In Stock
2 column wide molle attachment. Flap can be tucked in for open top use.
Fits:
- m67 frag
- hand cuffs
- 40mm x46
Weight 43g
Welcome on the webshop of Batavi Tactical Solutions
Home
There are 16 products.
Availability: 1 In Stock
1x Adaptive Rig System Split Rig setup with Tango modules
1x ARS buttpack
2x Large GP
2x Double mag pouch
1x L4P x EURMED IFAK insert
This setup will fit up to 22 m4 mags.
The components can be used to build a LBE, split front chest rig or a micro chest rig. The whole setup with fit inside the included ARS CBRN Buttpack.
No mags, meds or radios included. Lifetime guarantee. Made from 500d Cordura laminate. NIR-compliant materials.
Availability: 1 In Stock
L4PC plate bags
L4PC structural cummerbund
L4PC structural shoulder pads.
Fits M-XL SAPI plates.
Front plate bag has our patent pending integrated mobile device compartment.
Rear plate bag has our patent pending evacuation properties.
Upgrade with Adaptive Rig System Quad placard and Crye Precision AVS-harness.
Use Adaptive Rig System Bravo harness to run the front plate bag with a ruck comfortably (last pic).
Availability: 1 In Stock
WCSIG is a fixed pouch chest rig that is made from high quality mil-spec materials in Finland.
4x double mag pouch (2x5.56, 2x7.62x39, 1x.308)
2x radio pouch (will also fit 1l nalgene or a pistol)
2x general purpose pouch (GP will fit 6x m4 mags each)
- molle on shoulder straps, under mag pouches and on the side of the GP pouches
Chest rig, pull-tabs, shoulder straps and a back strap included.
Shoulder straps are attached with 1” side release buckles and can be changed to any after market straps, including our Adaptive Rig System Bravo.
The base of the rig is laser cut from two pieces of cordura laminate. While lamianate is twice as expensive as regular cordura (of which most rigs afe made from), it reduces the amount of seams which adds durability, reduces manufacturing time and makes the affordable pricing possible. The shock cords wear out after years of use but they are replaceable and the rig will last from father to son.
Upgrade your WCSIG with our Adaptive Rig System Bravo yoke, L4 x EURMED IFAK insert, TQ pouch and frag pouches
Availability: Out of stock
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
Availability: Out of stock
Based on the low profile front flap of the JPC and CPC. This detachable flap attaches to the front platebag of the JPC or AVS (Standard or MBAV) to provide three M4 mag pouches. Includes three shock-cord magazine retention straps.
Availability: 3 In Stock
Attaches to front platebag of JPC or AVS (Standard or MBAV) to provide three M4 mag pouches.
Availability: 1 In Stock
Roll top 3 day assault pack.
Up to 50 liters (+ back panel)
Compatible with Crye Precision back panels. Inform back panel size with order.
2x 1 liter nalgene / canteen pouches
Molle on sides and back
Signal panel / skrim pouch on bottom
Full length zipper
Molle lined interior
Removable hip belt
Internal dual Curv frame
Bladder hose / cable opening to main compartment
Compatible with velcro padding (shown with black aftermarket CP padding)
Shown with Crye Precision zip on back panel (No back panel included)
Alternative closure attachment on sides.
Includes extra straps with click in buckles (”ARS buckles”) that can be used for carrier integration.
Weight 1,1kg / 38oz
Designed for sub-20kg loads
Made from X-pac. NIR-compliant. Made in Finland.
Availability: Out of stock
Ultralight Large GP
50 grams / 1.76 oz.
Ultralight version of our Large GP.
Designed for SAW box mag or similar large items.
Packs slick when empty.
Made from X-Pac.
NIR-compliant materials.
Availability: 2 In Stock
The Crye Precision G3 Field Shirt is a versatile, high-performance utility shirt designed for demanding environments. This shirt features innovative NoProfile dual-entry chest pockets for easy access while wearing body armor, making it ideal for tactical use. The left arm includes a pen pocket, and the slanted, dual-layer bicep pockets come with new segmented Velcro brand panels to minimize bulk. The bicep pockets also feature an eye-pro hanger for added convenience. Reinforced, shaped elbows are compatible with removable Field Elbow Pads (sold separately), ensuring durability and protection. Made in the USA from Mil-Spec 50/50 NYCO ripstop fabric, this shirt is built to last.
Availability: 3 In Stock
The design that started a movement. When we developed the first version of our signature shirt, we had no idea that it would lead to such widespread adoption of our basic design. The G3 COMBAT SHIRT™ is a combat-specific garment specifically designed to be worn under body armor. It keeps you cool with wicking, lightweight, high-performance, flame-resistant DRIFIRE® torso fabric and reinforced Mil-Spec 50/50 NYCO ripstop sleeves. Designed for use with our patented removable AIRFLEX™ ELBOW PADS (sold separately). The G3 COMBAT SHIRT™ features a zip collar that allows easy donning and doffing while keeping slings, straps, and brass off your neck. Patented, see www.lwpatents.com. Made in US from US materials.