



Welkom op de website van Batavi Tactical Solutions
Full featured no melt/no drip technical pant suitable for conducting direct action tasks.
Nog aan te passen
Nog aan te passen
(bewerken met de module Klantenverzekering)
PRODUCT FEATURES
+
Patterning
Reinforced knees & gusseted crotch allowing for increased durability and enhancing end-user mobility
Cuff & Sleeves Configuration
Velcro® ankle cuff closure seals over boots
Waist & Belt Configuration
Adjustable waist (c.2”) allowing for waist sizing flexibility
Enhanced belt loops allow for the use of the LEAF Rigger's system
Pocket Configuration
Two Velcro® flap seat pockets allowing for optional/extra storage
Two hand pockets with internal knife pocket
Two Velcro® flap cargo pockets allowing for the dump pocket compatibility
Integrated Features
Internal knee cap sleeve fits removable soft knee pads or fully compatible (separately purchased) LEAF knee caps
PRINCIPAL MATERIALS & CARE
+
Materials
EV®50 10 mm foam (removable soft knee pads)
B&O 6.5oz No Melt/No Drip Nylon-Cotton Ripstop Weave
Care
Machine wash in warm water (30°C) or dry clean.
Wash dark colours separately.
Tumble dry on medium heat.
Iron on medium heat.
Lightweight non-membrame softshell pants for maximum mobility when its needed most.
Tilak operator pants multicam
The design that started a movement. When we developed the first version of our signature shirt, we had no idea that it would lead to such widespread adoption of our basic design. The G3 COMBAT SHIRT™ is a combat-specific garment specifically designed to be worn under body armor. It keeps you cool with wicking, lightweight, high-performance, flame-resistant DRIFIRE® torso fabric and reinforced Mil-Spec 50/50 NYCO ripstop sleeves. Designed for use with our patented removable AIRFLEX™ ELBOW PADS (sold separately). The G3 COMBAT SHIRT™ features a zip collar that allows easy donning and doffing while keeping slings, straps, and brass off your neck. Patented, see www.lwpatents.com. Made in US from US materials.
Taiga tropical multicam pants
Arcteryx Leaf Assault Balaclava FR
A flame resistant Assault Balaclava FR that is worn when conducting Direct Action tasks that will provide user protection from flame/incendiaries.
A lightweight, anatomically shaped knee cap that can be worn in conjunction with the LEAF Assault Pant AR/FR or the LEAF Assault Coverall AR/FR. The Knee Cap can also be worn in a stand alone manner.
This is a set of Gen 3 Combat Pants from crye Precision. The pants are built for use when on patrol or in dynamic environments and need more flexibility and features in a set of pants and are flame resistant. The pants have cargo pockets and ankle pockets along with pockets on the front of the thighs. At the knees are pockets compatible with Crye knee pad inserts, pad height is adjusted with a draw string hidden in the thigh pockets. Back pockets are zippered and the waist is adjustable with hook and loop tabs for better fit. The pant cuffs are also adjustable.
The Crye Precision G4 NSPA Combat Pant is crafted with advanced VTX RIPSTOP™ stretch fabric, offering exceptional durability and lightweight comfort. Ideal for demanding environments, these pants provide superior mobility and breathability, making them perfect for tactical operations. The low-profile pockets are designed to minimize bulk while accommodating essential gear, and the built-in kneepad adjuster ensures a customized fit for added protection.
The LT562 Curv® Belt Cobra features a reinforced modular design with a cobra buckle, renowned for its ultra-low weight, high impact strength, remarkable flexibility, and exceptional cold-resistant properties.
Available in both 13 and 20 liters of capacity, the AURA backpack is revolutionary in terms of efficacy and versatility for a variety of missions.
The MX174 Multi-Hanger Pouch, made from MX-Multiaxial laminate, is a versatile pouch designed to provide extra storage. It can be conveniently attached to a plate carrier or chest rig using a hook and loop fastener, without sacrificing space for other pouches or equipment.
The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.
The Mag NOW! The pouch is an improved version of the classic “bungee pouch.” This pouch is immediate access open-top magazine pouch that uses moulded rubber “pull tabs” instead of sewn webbing used on traditional bungee pouches.
AGM PVS-14 NW Multi-Purpose HP Night Vision Monocular Gen 2+ "Photonis Autogated" Manual Gain control ECHO IIT White Phosphor
Similar to its predecessor, the Burrito Bag is a near-universal, low-profile solution to add admin pouch capability behind industry-standard SwiftClip and G-Hook placards. It is designed to give users the ability to have a side-access admin. The Burrito Bag attaches between the two side release buckles used on carriers and placard adapters. When empty, it adds little to no additional bulk to the front of your carrier.
The Multi-Pouch Vertical MX054 is a lightweight, versatile storage solution for your extra gear. Ideal for quick organisation and easy access.
Tyr Tactical NIJ level 3A abdomen platform in multicam.
Experience reliable and safe storage of a hand grenade with the Grenade Pouch MX007. Its durable material, secure features, and design focusing on ease of use ensure optimal performance and reliability.
The Wilcox L4 Three Hole Shroud fits MICH/ACH and Crye AirFrame helmets drilled with the standard three hole pattern. The L4 three hole shroud creates a solid mounting platform for your Wilcox NVG mount. Available with or without NVG lanyard.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
TYR tactical frontflap for 3 mags and an additional 3 elastic outer sleeves for 3 extra mags or tools!
Suitable for:
-Crye AVS, JPC, CPC, SPC.
-Spiritus systems Lv119
-Tyr tactical carriers
Adaptable with QASM or G-hooks for Ferro Concepts carriers
The Ferro Concepts FCPC V5 Base is the pinnacle of lightweight and versatile plate carrier design, honed over a decade of innovation. This advanced plate carrier is ideal for special operations, offering unparalleled adaptability and durability. Whether in the field or in demanding environments, the FCPC V5 ensures optimal performance and comfort.
The Ferro Concepts FCPC V5 Base is the pinnacle of lightweight and versatile plate carrier design, honed over a decade of innovation. This advanced plate carrier is ideal for special operations, offering unparalleled adaptability and durability. Whether in the field or in demanding environments, the FCPC V5 ensures optimal performance and comfort.
Sometimes you just don’t have any space to spare. That’s where the DropWing™ comes in. Utilizing vertical MOLLE slots, the DropWing™ allows you to mount things like our SEAR or KSAR horizontally below your plate bag or cummerbund. Additionally, holes are placed along the DropWing™ to utilize the included shock cord/cord locks. This is great for retaining breaching charges or whatever else you can strap down!
This website uses cookies to ensure you get the best experience on our website