A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
Welkom op de website van Batavi Tactical Solutions
- Clothing add remove
- Headgear add remove
- Packs & Pouches add remove
- Plate carriers & rigs add remove
- Misscelenous add remove
- Electronics & optics add remove
- Belts & Holsters add remove
- support add remove
- Clothing add remove
- Headgear add remove
- Packs & Pouches add remove
- Plate carriers & rigs add remove
- Misscelenous add remove
- Electronics & optics add remove
- Belts & Holsters add remove
- support add remove

Blue force gear Mag NOW! triple pouch
- Write a review
The Mag NOW! The pouch is an improved version of the classic “bungee pouch.” This pouch is immediate access open-top magazine pouch that uses moulded rubber “pull tabs” instead of sewn webbing used on traditional bungee pouches.
Nog aan te passen
Nog aan te passen
(bewerken met de module Klantenverzekering)
The moulded tabs sit on the magazine in a consistent location every time, keeping the draw consistent and improving reloading speed. No longer will you have to fumble with undersized webbing tabs faced in random directions forcing you to look down to release a magazine.
The Mag NOW! The pouch is built with ULTRAcomp and has a MOLLEminus front, making it “stackable” with other MOLLE pouches. The Pouch is 6 MOLLE columns wide and mounts on any MOLLE platform and is perfectly sized to fit across an armour carrier such as the PLATEminus, PLATEminus 2, or LMAC.
The Mag NOW! comes in two sizes - a Single that holds one M4 magazine or a Triple that holds three M4 magazines. The tension and length of the bungee straps can be tightened or loosened by adjusting the knot on the backside.
Thank you for the reviews ! Your comment is submitted
Je bent misschien ook geïnteresseerd in
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is designed to securely store the magazine for your rifle so you can still quickly pull it out when needed.
The Stackable Ten-Speed M4 Mag Pouch builds on the Ten-Speed Pouches used by the best-of-the-best worldwide and now adds a single row of MOLLE on the front to stack additional pouches.
The Low Pro GP Pouch was designed to fit the Ten-Speed SF Chest Rig and the Dapper Satchel.
The Ten-Speed Ultralight Dump Pouch redefines dump pouches. Extremely compact, only taking up a 2 x 2 MOLLE field; the bag portion stays folded under Ten-Speed® elastic when not in use.
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
You can integrate any mag pouch into the MX463 Dump Pouch. This provides a space-efficient solution for changing magazines with a single action—insert the old magazine and pull out the new one.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is designed to securely store the magazine for your rifle so you can still quickly pull it out when needed.
The Stackable Ten-Speed M4 Mag Pouch builds on the Ten-Speed Pouches used by the best-of-the-best worldwide and now adds a single row of MOLLE on the front to stack additional pouches.
The Low Pro GP Pouch was designed to fit the Ten-Speed SF Chest Rig and the Dapper Satchel.
The Ten-Speed Ultralight Dump Pouch redefines dump pouches. Extremely compact, only taking up a 2 x 2 MOLLE field; the bag portion stays folded under Ten-Speed® elastic when not in use.
The MX234 Panel features three Multi-Calibre Pouches, each designed to securely hold various sizes of rifle magazines. This versatile panel can either serve as a standard panel on a plate carrier or be converted into a micro-rig. It provides a quick method for gearing up and adapting to evolving mission requirements
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
You can integrate any mag pouch into the MX463 Dump Pouch. This provides a space-efficient solution for changing magazines with a single action—insert the old magazine and pull out the new one.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The Blackfolium HYBRID Mag Pouch - Rifle Magazine Holster is designed to securely store the magazine for your rifle so you can still quickly pull it out when needed.
The Stackable Ten-Speed M4 Mag Pouch builds on the Ten-Speed Pouches used by the best-of-the-best worldwide and now adds a single row of MOLLE on the front to stack additional pouches.
The Low Pro GP Pouch was designed to fit the Ten-Speed SF Chest Rig and the Dapper Satchel.
The Ten-Speed Ultralight Dump Pouch redefines dump pouches. Extremely compact, only taking up a 2 x 2 MOLLE field; the bag portion stays folded under Ten-Speed® elastic when not in use.
16 andere producten in dezelfde categorie:
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
Roll top 3 day assault pack.
Up to 50 liters (+ back panel)
Compatible with Crye Precision back panels. Inform back panel size with order.
2x 1 liter nalgene / canteen pouches
Molle on sides and back
Signal panel / skrim pouch on bottom
Full length zipper
Molle lined interior
Removable hip belt
Internal dual Curv frame
Bladder hose / cable opening to main compartment
Compatible with velcro padding (shown with black aftermarket CP padding)
Shown with Crye Precision zip on back panel (No back panel included)
Alternative closure attachment on sides.
Includes extra straps with click in buckles (”ARS buckles”) that can be used for carrier integration.
Weight 1,1kg / 38oz
Designed for sub-20kg loads
Made from X-pac. NIR-compliant. Made in Finland.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
The performance-oriented MIG 4.0 Jacket was further developed in cooperation with special units, optimizing the cut and reducing the outer seams,by using special materials. High wearing comfort, robust longevity and optimal protection characterize this multifunctional Jacket. The windand water-repellent outer material and the redesigned, adjustable in 2 directions hood makes the Jacket independent from weather conditions.
Goretex 3-layer pants for the most hostile environments.
The Multi-Pouch Horizontal MX053 provides a lightweight, versatile storage solution for your extra gear. Ideal for quick organisation and easy access.
The Hanger Double Magazine Pouch horizontalMX103 can be easily attached to a plate carrier or chest rig via hook and loop to give you extra storage space. It is the successor to our popular HL104 and LT104 magazine pouches.
Team Wendy Exfil Helmet with 2.0 Rail
The Team Wendy EXFIL Helmet features a hybrid composite shell for increased strength and also a unique geometry for optimal fit. An innovative, boltless CAM FIT™ retention quickly adjusts to individual head shapes, providing comfort and stability. Additionally, a Zorbium® foam liner protects against impact and allows for an overhead communications headband. Move your pads to customize the helmet fit. A lanyard-compatible Wilcox® shroud* secures any standard NVG mount.
EXFIL® Ballistic helmets are available with EXFIL® Rail 2.0. The EXFIL® Rail 2.0 accessory mounting system is compatible with all EXFIL® accessories, including the EXFIL® Ballistic Visor and also the EXFIL® Face Shield.
*NOTE: While the Wilcox® W shroud comes standard with the EXFIL® Ballistic, the NVG mount/interface required for attaching night vision devices to the helmet, such as the Wilcox® G24, is not included.
Here’s something epic you don’t see every year. A unique modular electronic warfare backpack designed to carry the Thor III IED jammer. If you don’t need to watch out for roadside bombs, you can use this very versatile and super customizable pack for hauling all sorts of heavy crap. Made in the USA.
TYR tactical frontflap for 3 mags and an additional 3 elastic outer sleeves for 3 extra mags or tools!
Suitable for:
-Crye AVS, JPC, CPC, SPC.
-Spiritus systems Lv119
-Tyr tactical carriers
Adaptable with QASM or G-hooks for Ferro Concepts carriers
Full featured no melt/no drip technical pant suitable for conducting direct action tasks.
Lightweight and durable multi-purpose trousers made of non-membrane soft shell.
Suitable for military and outdoor activities mainly.
Attaches to front platebag of JPC or AVS (Standard or MBAV) to provide three M4 mag pouches.
The Low Pro GP Pouch was designed to fit the Ten-Speed SF Chest Rig and the Dapper Satchel.
The SkullCap™ is a fitted, 3-panel cap, cut for maximum coverage and situational awareness.
The flame retardant Assault Balaclava FR has been specifically designed to meet the requirements of direct action tasks. These are short, high-intensity missions with zero margin for error.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
Roll top 3 day assault pack.
Up to 50 liters (+ back panel)
Compatible with Crye Precision back panels. Inform back panel size with order.
2x 1 liter nalgene / canteen pouches
Molle on sides and back
Signal panel / skrim pouch on bottom
Full length zipper
Molle lined interior
Removable hip belt
Internal dual Curv frame
Bladder hose / cable opening to main compartment
Compatible with velcro padding (shown with black aftermarket CP padding)
Shown with Crye Precision zip on back panel (No back panel included)
Alternative closure attachment on sides.
Includes extra straps with click in buckles (”ARS buckles”) that can be used for carrier integration.
Weight 1,1kg / 38oz
Designed for sub-20kg loads
Made from X-pac. NIR-compliant. Made in Finland.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
The performance-oriented MIG 4.0 Jacket was further developed in cooperation with special units, optimizing the cut and reducing the outer seams,by using special materials. High wearing comfort, robust longevity and optimal protection characterize this multifunctional Jacket. The windand water-repellent outer material and the redesigned, adjustable in 2 directions hood makes the Jacket independent from weather conditions.
Goretex 3-layer pants for the most hostile environments.
The Multi-Pouch Horizontal MX053 provides a lightweight, versatile storage solution for your extra gear. Ideal for quick organisation and easy access.
The Hanger Double Magazine Pouch horizontalMX103 can be easily attached to a plate carrier or chest rig via hook and loop to give you extra storage space. It is the successor to our popular HL104 and LT104 magazine pouches.
Team Wendy Exfil Helmet with 2.0 Rail
The Team Wendy EXFIL Helmet features a hybrid composite shell for increased strength and also a unique geometry for optimal fit. An innovative, boltless CAM FIT™ retention quickly adjusts to individual head shapes, providing comfort and stability. Additionally, a Zorbium® foam liner protects against impact and allows for an overhead communications headband. Move your pads to customize the helmet fit. A lanyard-compatible Wilcox® shroud* secures any standard NVG mount.
EXFIL® Ballistic helmets are available with EXFIL® Rail 2.0. The EXFIL® Rail 2.0 accessory mounting system is compatible with all EXFIL® accessories, including the EXFIL® Ballistic Visor and also the EXFIL® Face Shield.
*NOTE: While the Wilcox® W shroud comes standard with the EXFIL® Ballistic, the NVG mount/interface required for attaching night vision devices to the helmet, such as the Wilcox® G24, is not included.
Here’s something epic you don’t see every year. A unique modular electronic warfare backpack designed to carry the Thor III IED jammer. If you don’t need to watch out for roadside bombs, you can use this very versatile and super customizable pack for hauling all sorts of heavy crap. Made in the USA.
TYR tactical frontflap for 3 mags and an additional 3 elastic outer sleeves for 3 extra mags or tools!
Suitable for:
-Crye AVS, JPC, CPC, SPC.
-Spiritus systems Lv119
-Tyr tactical carriers
Adaptable with QASM or G-hooks for Ferro Concepts carriers
Full featured no melt/no drip technical pant suitable for conducting direct action tasks.
Lightweight and durable multi-purpose trousers made of non-membrane soft shell.
Suitable for military and outdoor activities mainly.
Attaches to front platebag of JPC or AVS (Standard or MBAV) to provide three M4 mag pouches.
The Low Pro GP Pouch was designed to fit the Ten-Speed SF Chest Rig and the Dapper Satchel.
The SkullCap™ is a fitted, 3-panel cap, cut for maximum coverage and situational awareness.
The flame retardant Assault Balaclava FR has been specifically designed to meet the requirements of direct action tasks. These are short, high-intensity missions with zero margin for error.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
Roll top 3 day assault pack.
Up to 50 liters (+ back panel)
Compatible with Crye Precision back panels. Inform back panel size with order.
2x 1 liter nalgene / canteen pouches
Molle on sides and back
Signal panel / skrim pouch on bottom
Full length zipper
Molle lined interior
Removable hip belt
Internal dual Curv frame
Bladder hose / cable opening to main compartment
Compatible with velcro padding (shown with black aftermarket CP padding)
Shown with Crye Precision zip on back panel (No back panel included)
Alternative closure attachment on sides.
Includes extra straps with click in buckles (”ARS buckles”) that can be used for carrier integration.
Weight 1,1kg / 38oz
Designed for sub-20kg loads
Made from X-pac. NIR-compliant. Made in Finland.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
The performance-oriented MIG 4.0 Jacket was further developed in cooperation with special units, optimizing the cut and reducing the outer seams,by using special materials. High wearing comfort, robust longevity and optimal protection characterize this multifunctional Jacket. The windand water-repellent outer material and the redesigned, adjustable in 2 directions hood makes the Jacket independent from weather conditions.
Goretex 3-layer pants for the most hostile environments.