Welcome on the webshop of Batavi Tactical Solutions
The Mayflower UW Chest Rig Gen IV is a low-profile mission focused vest
Shipping and delivery
We will keep you fully informed about during the order process.
Return Policy
After the day of receipt of the order you have 7 days to return the purchase.
The Mayflower UW Chest Rig Gen IV is a low-profile mission focused vest built to be ambidextrous and designed to carry the following: 4 ea 5.56mm magazines, 2 pistol magazines, up to 2 small radios (PRC-152/MBITR) as well as two GP pockets. The H style harness features loops to route antennas, comms wires and hydration bladder tubing and is removable via 4 one inch ITW-Nexus side release buckles and designed to be mounted to the front of the Low-Profile Armor Carrier. The body of the chest rig has a built in map pocket with a velcro closure. Elastic is provided for cable management and antenna relocation.
All buckles are ITW-Nexus IR and all materials and workmanship are 100% made in the USA.
FEATURES
Carries 4x 5.56mm mags, 2x pistol mags, up to 2x small radios
Two GP pockets
Loops to route antennas, wires and hydration bladder tubing
Four one inch ITW-Nexus side release buckles
Designed to mount to front of Low-Profile Armor Carrier
Built in map pocket with a velcro closure
SPECIFICATIONS
500D Cordura Construction
100% Made in the USA
1x Adaptive Rig System Split Rig setup with Tango modules
1x ARS buttpack
2x Large GP
2x Double mag pouch
1x L4P x EURMED IFAK insert
This setup will fit up to 22 m4 mags.
The components can be used to build a LBE, split front chest rig or a micro chest rig. The whole setup with fit inside the included ARS CBRN Buttpack.
No mags, meds or radios included. Lifetime guarantee. Made from 500d Cordura laminate. NIR-compliant materials.
WCSIG is a fixed pouch chest rig that is made from high quality mil-spec materials in Finland.
4x double mag pouch (2x5.56, 2x7.62x39, 1x.308)
2x radio pouch (will also fit 1l nalgene or a pistol)
2x general purpose pouch (GP will fit 6x m4 mags each)
- molle on shoulder straps, under mag pouches and on the side of the GP pouches
Chest rig, pull-tabs, shoulder straps and a back strap included.
Shoulder straps are attached with 1” side release buckles and can be changed to any after market straps, including our Adaptive Rig System Bravo.
The base of the rig is laser cut from two pieces of cordura laminate. While lamianate is twice as expensive as regular cordura (of which most rigs afe made from), it reduces the amount of seams which adds durability, reduces manufacturing time and makes the affordable pricing possible. The shock cords wear out after years of use but they are replaceable and the rig will last from father to son.
Upgrade your WCSIG with our Adaptive Rig System Bravo yoke, L4 x EURMED IFAK insert, TQ pouch and frag pouches
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
The Ten-Speed Ultralight Dump Pouch redefines dump pouches. Extremely compact, only taking up a 2 x 2 MOLLE field; the bag portion stays folded under Ten-Speed® elastic when not in use.
The Wilcox L4 Three Hole Shroud fits MICH/ACH and Crye AirFrame helmets drilled with the standard three hole pattern. The L4 three hole shroud creates a solid mounting platform for your Wilcox NVG mount. Available with or without NVG lanyard.
The SkullCap™ is a fitted, 3-panel cap, cut for maximum coverage and situational awareness.
The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, hook & loop, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile.
High quality, lightweight softshell jacket in multicam.
1x Adaptive Rig System Split Rig setup with Tango modules
1x ARS buttpack
2x Large GP
2x Double mag pouch
1x L4P x EURMED IFAK insert
This setup will fit up to 22 m4 mags.
The components can be used to build a LBE, split front chest rig or a micro chest rig. The whole setup with fit inside the included ARS CBRN Buttpack.
No mags, meds or radios included. Lifetime guarantee. Made from 500d Cordura laminate. NIR-compliant materials.
The H70 panel, which is also available in the ISKIT, is a very light and easy-to-pack signaling device. Originally developed for tactical use, the H70 signaling device can also be used well in the outdoor area.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The Ferro X Pig (FDT) Delta FR Glove is a minimally designed glove that pays homage to the once loved Nomex Flight Glove. Featuring full-touch screen compatibility, and a high level of dexterity. Fold-over finger construction eliminates fingertip discomfort and the single-layer palm gives great tactile sensitivity. Additionally these gloves are constructed out of Nomex® flame resistant material.
Full featured no melt/no drip technical pant suitable for a variety of combat applications.
This boonie is designed with multiple pass-throughs for seamless integration with head harnesses, along with eyelet holes for securely attaching an NVG shroud. The oversized fit ensures compatibility with various head harnesses. The pre-worn brim eliminates straight lines for a more natural look, and the adjustable paracord provides a secure fit. Additionally, this cover is NIR compliant.
A very lightweight & and packable wind resistant jacket.
Looser fit and two roomy pockets for diverse activities and conditions.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
This handcuff pouch will hold almost any brand of handcuff. Retention strap is adjustable in length. Also ideal for dip cans and other similar products.
Lightweight and durable multi-purpose jacket made of non-membrane Soft Shell material.
Suitable for military and outdoor activities.
Nederlands
