Welkom op de website van Batavi Tactical Solutions
Nederlands
The Mayflower UW Chest Rig Gen IV is a low-profile mission focused vest
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
The Mayflower UW Chest Rig Gen IV is a low-profile mission focused vest built to be ambidextrous and designed to carry the following: 4 ea 5.56mm magazines, 2 pistol magazines, up to 2 small radios (PRC-152/MBITR) as well as two GP pockets. The H style harness features loops to route antennas, comms wires and hydration bladder tubing and is removable via 4 one inch ITW-Nexus side release buckles and designed to be mounted to the front of the Low-Profile Armor Carrier. The body of the chest rig has a built in map pocket with a velcro closure. Elastic is provided for cable management and antenna relocation.
All buckles are ITW-Nexus IR and all materials and workmanship are 100% made in the USA.
FEATURES
Carries 4x 5.56mm mags, 2x pistol mags, up to 2x small radios
Two GP pockets
Loops to route antennas, wires and hydration bladder tubing
Four one inch ITW-Nexus side release buckles
Designed to mount to front of Low-Profile Armor Carrier
Built in map pocket with a velcro closure
SPECIFICATIONS
500D Cordura Construction
100% Made in the USA
1x Adaptive Rig System Split Rig setup with Tango modules
1x ARS buttpack
2x Large GP
2x Double mag pouch
1x L4P x EURMED IFAK insert
This setup will fit up to 22 m4 mags.
The components can be used to build a LBE, split front chest rig or a micro chest rig. The whole setup with fit inside the included ARS CBRN Buttpack.
No mags, meds or radios included. Lifetime guarantee. Made from 500d Cordura laminate. NIR-compliant materials.
WCSIG is a fixed pouch chest rig that is made from high quality mil-spec materials in Finland.
4x double mag pouch (2x5.56, 2x7.62x39, 1x.308)
2x radio pouch (will also fit 1l nalgene or a pistol)
2x general purpose pouch (GP will fit 6x m4 mags each)
- molle on shoulder straps, under mag pouches and on the side of the GP pouches
Chest rig, pull-tabs, shoulder straps and a back strap included.
Shoulder straps are attached with 1” side release buckles and can be changed to any after market straps, including our Adaptive Rig System Bravo.
The base of the rig is laser cut from two pieces of cordura laminate. While lamianate is twice as expensive as regular cordura (of which most rigs afe made from), it reduces the amount of seams which adds durability, reduces manufacturing time and makes the affordable pricing possible. The shock cords wear out after years of use but they are replaceable and the rig will last from father to son.
Upgrade your WCSIG with our Adaptive Rig System Bravo yoke, L4 x EURMED IFAK insert, TQ pouch and frag pouches
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
A super modular chest rig base kit. Just add the pouches, shoulder straps and a backstrap. Compatible with all shoulder straps that have 1” buckles, including our ARS Bravo module which includes both shoulder straps and the backstrap.
The included components allow attaching 5 pouches to each other. Order 2 sets for more pouches or a split rig build, 3 sets or more for a belt kit build.
Compatible with Adaptive Rig System components and molle to velcro adapter.
NIR-compliant materials.
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
When speed and agility counts!
Attaches to front platebag of JPC or AVS (Standard or MBAV) to provide three M4 mag pouches.
The V-Lite™ Multi-Mode is a versatile personal lighting/identification marker allowing the user to program the light to their preferred function.
Comtac fuzz / velcro covers with skins to protect your headset and secure cables.
Eberlestock’s X41 HiSpeed II Pack is the newest generation of the HiSpeed pack. This Eberlestock backpack is a highly functional, minimalist tactical pack providing everything you might want.The pack has a unique contour shape that tapers at both the top and the bottom, giving the pack an excellent close-to-the-body ride. It is fully compressible with pairs of side-mounted compression straps that draw the load upward to optimally position the pack's contents over the wearer's center-of-gravity to guarantee comfort even under heavier loads. New to the X41, the HiSpeed II has two generously sized form-following pockets on the exterior of the upper and lower front flaps. MOLLE-10 lightweight webbing is used, to which you can attach conventional 25mm MOLLE accessories. The X41 features two interior pockets fitted for holding hydration systems, including portals for tubes. The interior features include a hydration sleeve (water bladders sold separately), two document / laptop sleeves, a mesh zippered pocket, MOLLE compatible webbing, and a fold-away shelf that allows you to either segregate or combine the top and bottom interior load space.
Conceal the most visible and recognizable piece of your kit
The only customizable helmet scrim on the market.
A casual multi-purpose insulated jacket. Insulated with Polartec® Alpha®, providing a high level of breathability.
The revised Generation 2 of the HK417 1 Series magazine pouch from Lindnerhof is now even lighter without sacrificing the robustness of tried and tested materials.
A long-sleeved anatomic top that takes full advantage of the superior comfort and performance of Polartec® Power Stretch® material.
The First Spear STT PC, offers 6/12(TM) and Tubes (TM) technology in a fair priced Plate Carrier for the first time. What the market has been missing for years (since the likes of the Eagle Plate Carrier with Cummerbund) has been a full-featured plate carrier from a top tier brand. With the First Spear STT Plate Carrier, you not only get all the traditional features in an all-molle front, back and cummerbund, but you get the bleeding-edge technologies of 6/12 (TM) and Tubes (TM) for a lightweight Molle interface, sex-pot good looks, and the fastest don and doff in the industry- all in a package that weighs a scant 1.6 lbs.
Multipurpose slim backpack customizable for a variety of needs of the operator.
The Arc'teryx LEAF Cold WX Zip Neck AR is a high performance long sleeve shirt, which is ideal as a warming base layer. Thanks to the superior material and the functional zip collar, the Cold WX Zip Neck AR guarantees thermal efficiency, optimal ventilation and excellent moisture management.
2-layer goretex paclite jacket, easy packable in your platecarrier for quick acces if needed!
The Lindnerhof Fixation Strap Rifle LT278 is an elastic safety strap with quick release for secure fixation of the long gun
Team Wendy Exfil Helmet with 2.0 Rail
The Team Wendy EXFIL Helmet features a hybrid composite shell for increased strength and also a unique geometry for optimal fit. An innovative, boltless CAM FIT™ retention quickly adjusts to individual head shapes, providing comfort and stability. Additionally, a Zorbium® foam liner protects against impact and allows for an overhead communications headband. Move your pads to customize the helmet fit. A lanyard-compatible Wilcox® shroud* secures any standard NVG mount.
EXFIL® Ballistic helmets are available with EXFIL® Rail 2.0. The EXFIL® Rail 2.0 accessory mounting system is compatible with all EXFIL® accessories, including the EXFIL® Ballistic Visor and also the EXFIL® Face Shield.
*NOTE: While the Wilcox® W shroud comes standard with the EXFIL® Ballistic, the NVG mount/interface required for attaching night vision devices to the helmet, such as the Wilcox® G24, is not included.
The SkullCap™ is a fitted, 3-panel cap, cut for maximum coverage and situational awareness.
English
