Welkom op de website van Batavi Tactical Solutions
Nederlands
The Mayflower UW Chest Rig Gen IV is a low-profile mission focused vest
Beveiligingsbeleid
Nog aan te passen
Leveringsbeleid
Nog aan te passen
Retourbeleid
(bewerken met de module Klantenverzekering)
The Mayflower UW Chest Rig Gen IV is a low-profile mission focused vest built to be ambidextrous and designed to carry the following: 4 ea 5.56mm magazines, 2 pistol magazines, up to 2 small radios (PRC-152/MBITR) as well as two GP pockets. The H style harness features loops to route antennas, comms wires and hydration bladder tubing and is removable via 4 one inch ITW-Nexus side release buckles and designed to be mounted to the front of the Low-Profile Armor Carrier. The body of the chest rig has a built in map pocket with a velcro closure. Elastic is provided for cable management and antenna relocation.
All buckles are ITW-Nexus IR and all materials and workmanship are 100% made in the USA.
FEATURES
Carries 4x 5.56mm mags, 2x pistol mags, up to 2x small radios
Two GP pockets
Loops to route antennas, wires and hydration bladder tubing
Four one inch ITW-Nexus side release buckles
Designed to mount to front of Low-Profile Armor Carrier
Built in map pocket with a velcro closure
SPECIFICATIONS
500D Cordura Construction
100% Made in the USA
1x Adaptive Rig System Split Rig setup with Tango modules
1x ARS buttpack
2x Large GP
2x Double mag pouch
1x L4P x EURMED IFAK insert
This setup will fit up to 22 m4 mags.
The components can be used to build a LBE, split front chest rig or a micro chest rig. The whole setup with fit inside the included ARS CBRN Buttpack.
No mags, meds or radios included. Lifetime guarantee. Made from 500d Cordura laminate. NIR-compliant materials.
WCSIG is a fixed pouch chest rig that is made from high quality mil-spec materials in Finland.
4x double mag pouch (2x5.56, 2x7.62x39, 1x.308)
2x radio pouch (will also fit 1l nalgene or a pistol)
2x general purpose pouch (GP will fit 6x m4 mags each)
- molle on shoulder straps, under mag pouches and on the side of the GP pouches
Chest rig, pull-tabs, shoulder straps and a back strap included.
Shoulder straps are attached with 1” side release buckles and can be changed to any after market straps, including our Adaptive Rig System Bravo.
The base of the rig is laser cut from two pieces of cordura laminate. While lamianate is twice as expensive as regular cordura (of which most rigs afe made from), it reduces the amount of seams which adds durability, reduces manufacturing time and makes the affordable pricing possible. The shock cords wear out after years of use but they are replaceable and the rig will last from father to son.
Upgrade your WCSIG with our Adaptive Rig System Bravo yoke, L4 x EURMED IFAK insert, TQ pouch and frag pouches
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
A super modular chest rig base kit. Just add the pouches, shoulder straps and a backstrap. Compatible with all shoulder straps that have 1” buckles, including our ARS Bravo module which includes both shoulder straps and the backstrap.
The included components allow attaching 5 pouches to each other. Order 2 sets for more pouches or a split rig build, 3 sets or more for a belt kit build.
Compatible with Adaptive Rig System components and molle to velcro adapter.
NIR-compliant materials.
The compact and padded Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not necessary. It makes it easier to carry backpacks, rifles, etc. on your back or allows you to quickly load magazines over a vest or plate carrier.
A modern multifunctional plate carrier made from CORDURA® fabric and webbing, offering proven robustness and durability.
The Chesty Rig Mini Harness was designed to offer more flexibility with our ADAPT line of products. It is only compatible with our ADAPT front flaps which can be interchanged between the Slickster™, FCPC™ and Chesty Rigs allowing quick customization to meet your mission needs.
The Ten-Speed Ultralight Dump Pouch redefines dump pouches. Extremely compact, only taking up a 2 x 2 MOLLE field; the bag portion stays folded under Ten-Speed® elastic when not in use.
The Rapid Access Trauma System (RATS) frontline medic bag is designed for quick, one-handed access to important medical supplies and features the optional Bolstered Ventilation and Stability (BVS) system.
The newly redesigned Rapid Access Trauma System (RATS) pack is a frontline medic bag whose every detail is focused on quick, one-handed access to organized medical supplies. There are multiple trauma shears and tourniquet holders throughout and large reinforced handles for hanging the pack on branches or inside of helicopters. It’s sized so that when mounted on the NICE Frame, there is room below the pack for carrying litters or hydraulic combi tools. Inside the RATS are four removable pockets with clear vinyl windows and two IV bag pockets. The RATS also features removable BVS that optimizes the pack for use with or without body armor.
The True North Concepts Modular Holster Adaptor (MHA) is designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adaptors by clamping the belt between an aluminum adapter and aluminum belt bars.
The Rapid Access Trauma System (RATS) frontline medic bag is designed for quick, one-handed access to important medical supplies and features the optional Bolstered Ventilation and Stability (BVS) system.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weight and minimal water absorption.
The Ferro X Pig (FDT) Delta FR Glove is a minimally designed glove that pays homage to the once loved Nomex Flight Glove. Featuring full-touch screen compatibility, and a high level of dexterity. Fold-over finger construction eliminates fingertip discomfort and the single-layer palm gives great tactile sensitivity. Additionally these gloves are constructed out of Nomex® flame resistant material.
The Wilcox L4 Three Hole Shroud fits MICH/ACH and Crye AirFrame helmets drilled with the standard three hole pattern. The L4 three hole shroud creates a solid mounting platform for your Wilcox NVG mount. Available with or without NVG lanyard.
The LT468 inner Belt is the slimmer version of the classic LT465 inner Belt from Lindnerhof. Instead of 50 mm, it is 35 mm wide and therefore fits many different models of combat pants as well as most civilian ones.
Available in both 13 and 20 liters of capacity, the AURA backpack is revolutionary in terms of efficacy and versatility for a variety of missions.
The JPC (JUMPABLE PLATE CARRIER) 2.0™ is a lightweight and minimal armor vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC 2.0™ offers a variety of configuration options to suit an operator’s needs in terms of protection, modularity, and comfort. All AVS™ detachable front flaps are compatible (sold separately). It features our SKELETAL™ CUMMERBUND system with our patented Integrated Attachment System that allows pouches to be mounted on both the inside and outside of the cummerbund. This system sheds unnecessary weight and bulk while improving overall ventilation. Made in the US from US materials. Patented, see WWW.LWPATENTS.COM
Ultralight Large GP
50 grams / 1.76 oz.
Ultralight version of our Large GP.
Designed for SAW box mag or similar large items.
Packs slick when empty.
Made from X-Pac.
NIR-compliant materials.
The improved Generation 2 of the PA054/II Multi-Pouch vertical is now even more lightweight while maintaining the durability of proven materials.
Light and compact, the WML impresses with its high luminosity.
The Tarsier Eclipse ™ is the most advanced Night Vision Goggle (NVG) accessory on the market, allowing the operator to see objects from 3" to infinity at the same time and without loss of clarity. It incorporates a smooth action and a high-performance optical iris that can quickly be adjusted depending on the amount of ambient light.
The MX042 Plate Carrier stands out with its laser cuts on the front and back, and a multiaxial laminate. This material with laser-cuts instead of webbing ensures less weightand minimize water absorbtion.
Locked-in ballistic visor shield that works in conjunction with equipment mounted to the Caiman helmet's Wilcox Shroud.
Clear visor!
English
